The pe pipe electrofusion welding is the hot melt connection method of the polyethylene pipe system with hot melt butt joint (including saddle connection) and hot melt socket connection. The hot melt socket connection is suitable for pipe fittings with a relatively small diameter (generally the diameter is less than DN63 mm), because the pipe wall with a small diameter pipe has a thinner wall and a smaller cross section, and it is difficult to ensure the quality by using a butt joint. Hot-melt butt joints are suitable for large-diameter pipe fittings, which are less expensive than socket joints and are easy to manufacture. Because the oxide surface layer is cut before welding, the welding pressure can be controlled and the quality can be easily ensured. From the perspective of development, the use of hot-melt welding is the mainstream.
Tests have shown that the use of different grades of polyethylene pipe special materials (in accordance with the standard, melt flow rate MFR is not much difference) between the production of pipe fittings can be hot melt connection. However, because the materials commonly used in domestic production of polyethylene pipe fittings do not fully comply with the standard pipe special materials, it is recommended that they be tested and tested first when it is necessary to use hot melt connections of polyethylene pipe fittings of different brands and lot numbers.
Hot melt equipment - hot melt machine. The process and equipment (tools) for the hot melt connection of polyethylene piping systems are relatively simple. In recent years, there have been a lot of problems in connection with laying polyethylene pipes. The difficulty is that the quality of the hot melt connection is difficult to detect on site (without breaking the connection). Foreign countries are exploring the use of ultrasonic testing for the quality of hot-melt connections, but the use of the site has not yet been popularized. At present, it is generally relying on 'visual inspection' in the field. The guarantee of stable quality of the hot melt connection is mainly based on strict observance of the prescribed operating procedures (especially strict control over temperature, pressure and time parameters). It is recommended that polyethylene pipe fittings manufacturing companies develop more detailed operating procedures suitable for the company's pipe fittings according to relevant regulations (regulations of comparative principles) through tests and tests (combined with the characteristics of the hot melt connection equipment used). And through training and consulting to help constructors master operating procedures. The large companies that produce polyethylene piping systems internationally have these guidelines for the operation of hot melt connections. A practical approach to quality control is described in the U.S. PPI Handbook: A test hot melt connection is made at the site every day for 'bend test' (no destructive testing of the equipment is required) to determine if the process and equipment need to be adjusted .
- Shantui,Shanghai,Pengpu,Hebei,XuanGong,Inner Mongolia Dadi,Zoomlion series Bulldozer ,Daifeng Pipelayer Maintenance Service and spare parts .
- Shantui,Degong,XCMG,LiuGong,XGMA,SDLG,Wheel loader,Grader, Road Roller and Spare parts.
- CCEC,DCEC,Weichai Steyr,Shangchai,Xichai,Engine Unit and Diesel Generator Set and spare parts.
- Komatsu,Cat,Hitachi,Volvo,Case,Sany,XCMG,SDLG,Lishide,etc spare parts, Maintenance and Multi-functional parts.
Bulldozer Engine Parts ,Bulldozer Hydraulic Parts,Bulldozer Electric Parts,Bulldozer Structural Parts, Bulldozer Bearing ,Bulldozer Undercarriage Parts,Bulldozer Seal Ring.
We have rich experiences Maintenance Technical Engineer team,which means can provide Customs with highly efficiency Maintenance Services.In the past few years ,we have running the Maintenance services very well all over the world,solved the problems in time,because of our outstanding technical services for Bulldozer,Pipelayer,Excavator.
With the Independence Rights of Imp&Exp,Our business have covered every part throughout the country.Under The Belt and Road Initiative,International business also has developed to Russia, CIS countries,Middle east area,South America,Africa etc
Bulldozer Hydraulic Parts
Bulldozer Hydraulic Parts, Original Dozer Spiral Bevel Gear, Shantui Bulldozer Connector, Bulldozer Hydraulic Pump Parts,Torque Converter For Sd22 Ty220,Sd13 Main Frame And Transmission
Jining Changsong Construction Machinery Co., Ltd. , https://www.jncsmachinery.com