Metallurgical defects in bearing steel

Source: China Bearing Network Time: 2017-10-10

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The metallurgical quality defects of bearing steel include all the shortcomings that can be formed in the metallurgical materials such as exercise, casting, rolling and casting. According to the inspection methods, they can be divided into microscopic defects and microscopic defects.
1. Microscopic defects include the appearance of the appearance, the cracks, cracks, cracks, scratches, scratches, crusting and slag inclusions as well as low-pickling and inspection. The shrinkage holes, subcutaneous bubbles, white spots, over-burning, and intermediate looseness can be found. Usually loose and segregated, surface decarburization, etc. These are common shortcomings of steel. All kinds of special specifications for bearing steel have strict rules for handling these shortcomings.
2. The microscopic shortcomings of the microscopic defects include the expansion of the optical microscope to detect various non-metallic inclusions in the steel, carbon segregation, carbide network and ribbon, annealing unevenness, etc. These are all affecting steel. The primary shortcoming of pureness and uniformity. Strictly control these skill indicators and make them as much as possible; it is the primary content of all kinds of bearing steel skill needs.

Recommend to friends comments close window

Bearing related knowledge

Correct use and replacement of KOYO bearings Standard bearing heater effect Rolling bearing oil selection Common terms and definitions of rolling bearings Second, bearing parts progressive shaft support rigidity for bearing-like appearance

This article links to http://
Please indicate the bearing network http://

Previous:The next part of the bearing: the production process of plastic cage

Round Sling

2T Green Round Sling,Round Sling,Custom Rond Sling,Polyester Rond Sling

SHAOXING GULI BELTING CO., LTD , https://www.gulilifting.com