Water pipes are concealed works in home improvement, and maintenance is very troublesome. Buying good quality water pipes can save you from worries. The following small series introduces you to a few common senses for choosing water pipes for home decoration.
1. PPR pipes, steel-plastic pipes and copper pipes are generally used for home decoration pipes. The price of steel-plastic pipes is relatively high, while the price of PPR pipes is higher than that of steel-plastic pipes. The price of copper pipes is the most expensive, and the price is equivalent to that of PPR pipes. 4 times or so.
2, home decoration laying pipes should try to avoid laying from the ground, preferably from the top or wall, the pipe usage may increase slightly, but it is conducive to future pipeline maintenance.
3, the wall thickness of the hot and cold water pipe is not the same, the cold water pipe can not be used as a hot water pipe, the easy way to distinguish the hot and cold water pipe is a red line mark on the hot water pipe.
4, the standard length of PPR pipe is four meters each. When buying, please ask the price of each pipe or the price of pipe per meter. After the pipe is sent, remember to check whether the length of the pipe meets the requirements.
5, the water pipe for home decoration should pay attention to the pipe diameter and wall thickness, the general pipe should use 6 points, the pipe can be used to 4 points, in order to ensure the water consumption, the pipe can also use 6 points.
6, when the home decoration purchase pipe, pay attention to whether the inner diameter of the pipe is symmetrical, the uneven diameter of the pipe diameter will affect the docking of the two interfaces.
7. The “Construction and Decoration Engineering Quality Standard†of the Building Decoration Industry Association has such a regulation on the time and pressure of the pressure test: the newly installed water supply pipeline must be subjected to the pressure test according to the relevant regulations. Metal and composite pipe test pressure 0.6MPa, voltage regulation for 10 minutes, pipe pressure drop should be no more than 0.02MPa, no leakage; plastic pipe test pressure 0.8MPa, voltage regulation for 20 minutes, pipe pressure drop should be no more than 0.05MPa, no leakage.
This is an oil hardened steel, which is universally used by the ball and roller bearing industry. This steel has very good hardness, very good physical characteristics and excellent wear resistance.
Chrome Steel Balls: AISI 52100/ 100Cr6/ 100C6/ SUJ2/ Wks 1.3505
Bearing steel balls are widely used, the main applications are: as rolling elements of bearings, bicycles, car seat slides, CV joints, grinding media, universal wheels.
Chrome Steel Ball,Chrome Steel Ball Bearings,Chrome Ball Bearings,Chrome Steel Bearing
CHANGZHOU HUARI STEEL BALL CO., LTD. , https://www.stwballs.com