Inferior hardware work rough and hidden cabinet hidden troubles

In order to reduce costs, some of the inferior cabinets only use surface articles to mix consumers and only cover visible visible panels. Due to the lack of equipment, some cabinets use hand-sealing or electric irons to heat the hand-sealed edge to handle the plates. Not only the edge-sealing process is poor, but the edge appearance is not smooth and has burrs, and in the short-term there are hidden dangers of degumming.


Vantage Kitchen Cabinets    Mona Lisa Tiles

1. Drawers “swallow”: The author came to a cabinet shop less than 50 square meters, and there are three display cabinets in the store. A young guy who was busy drawing with a set of squares and pencils, saw a business door and immediately greeted with a smile. "Daddy looked at the cupboard wow?" The author opened a drawer with his hand, obviously feeling that the drawing was not smooth and the drawer was pulled out. Shake. Pushed twice more effortlessly, the drawer was finally shut.

2, long "acne" paint: go to a red paint cupboard next to the young man said enthusiastically: "We use imported paint, you can also according to your color preferences, first make a color block for your reference. "Then he took out several blocks of different colors in the drawer and said, "This is for the customer." Friends found that the surface of the color block was woody and dull, and the color block was radiated obliquely under the light. The spots dotted with paint were visible to the naked eye. From the side of the whole cabinet, the door panels are not on one line at the front and back, and they buzz when the door is opened. The hinges are rusted and rusty. There are burrs around the holes on the side panels of the cabinet and the spacing is not uniform.

3, "variety" panel: visited several other cabinet shops along the street and found many problems. Some cabinets have uneven edges and can even be seen on the side of the core; some cabinets collide with each other when the adjacent cabinet door is opened; some cabinets open with a pungent glue smell; some cabinets fire board A large mouth has been opened between the veneer and the core board... At the same time, a friend discovered that the price of these cabinets is only half or one third of the brand cabinets.

Expert diagnosis results:

1, poor quality hardware. Hinges are commonly used connection hardware for cabinet door panels. Poor quality hinges cost 0.7-0.8 yuan per pair, while hinged systems with damping systems cost tens of yuan per pair. Inferior hinges are generally welded by thin sheet metal, which causes the door to fall off due to poor load bearing. Poor hinge springs have poor elasticity and do not have resilience. They will lose their elasticity after a long time and the cabinet doors will not be closed. A good hinge uses a single stamping of the alloy, the surface is smooth, the plating thickness is not easy to rust, solid and strong, bearing capacity. The drawers of the cabinets are connected by slide rails. The poor quality slide rails can not only be pushed and pulled freely, but also due to the uneven bearing surface of the slide rails, resulting in unstable drawers.

2, rough edge. Formal edge seals should be well-sealed equipment and sealed with green plastic. All exposed surfaces of the board must be edge-sealed to control the release rate and quantity of free formaldehyde from the board and prevent moisture deformation of the board. In order to reduce costs, some of the inferior cabinets are merely superficially confusing consumers, and only the exposed plates are barely sealed. Due to the lack of equipment, some cabinets use hand-sealing or electric irons to heat the hand-sealed edge to handle the plates. Not only the edge-sealing process is poor, but the edge appearance is not smooth and has burrs, and in the short-term there are hidden dangers of degumming.

Home Furnishing tricky JS common cat fittings hardware to buy paint door price Vantage cabinet door cabinet cupboard door cabinet drawers ceramic tile price tile adhesive ld tile

Bolt Nut Washer

Bolt Nut Washer,Washer Screw Nut,Nut Bolt With Washer,Washer For Nut And Bolt

Hebei Qianmu Fastener Manufacturing Co., Ltd , https://www.qmjgjfasteners.com

This entry was posted in on