For the first time in 2009, China became the world's largest producer of metal machine tools, and became the world's largest producer, consumer and exporter of superhard materials. The total output of synthetic diamonds accounted for more than 90% of the world. According to China Machine Tool Network | Ao Li network statistics, in 2010 China's global machine tool output accounted for 31%, close to 1/3, is indeed large enough. The global metalworking machine tool industry has generally gone out of recession. In 2010, the world's 28 major machine tool producing countries and regions increased by 21% compared with the US$54.7 billion in 2009. At present, the global metal processing machine tool manufacturing industry has a three-point situation: 1. Europe is still the main consumer market of the global machine tool industry, accounting for 34% of global consumption, mainly because EU members have regional complementarity in their internal procurement. effect. 2. Consumption in Asia and Oceania has jumped to the top, accounting for about 49% of global consumption. 3. The Americas is the third largest market for consumption, accounting for 16% of global consumption. The reason is that the United States and Canada are industrialized advanced countries, while Central and South America are mostly developing industrialized countries, so their demand is still dominated by North America, so the Americas become the world's second largest import market.
Microbend Mass Flow Meter
Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.
Site Selection for Mass Flow Meter Installation
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com