High quality stone look surface
The quality of natural stone depends on the quality and processing technology of the block. High-quality stone surface, does not contain too much variegated color, uniform color of cloth, no flickering and thickening, and quality stone will have many unrecognized "defects" after processing, so that the surface of stone The tone of the pattern is an important indicator for evaluating the quality of the stone. If the processing technology and process are not closed, the finished product will have warpage, dents, stains, stains, missing corners, cracks, color lines, pits and so on. Such a stone is certainly not a "top grade". .
According to the person who specializes in selling imported stone, the high-quality natural stone should be neat and tidy without cutting corners. The surface is smooth and bright, and the hand touch is not rough.
Floor decoration to avoid "dark and dark"
The home decoration uses stone, do not make the home "dark and dark", should choose those light color stone as the floor decoration material, can give people a warm, quiet feeling, but also the effect of expanding the floor area.
The color of the countertop should be dirty
Stone decoration products enter the family, more are made into the countertops of all kinds of furniture, which must take into account the pollution problem, so we should choose the stone with deeper colors, like the marble, granite of green, blue and red series. In the marble, those with large patterns will have better decorative effects.
For the kitchen countertops, if you need to use stone, you should choose 25mm thick planks, preferably granite. Because granite is durable and radiant in the kitchen's excessive acid and alkali environment, it has a fairly high strength.
There is a set of paving maintenance
Because decorative stone is a natural product, the pattern and color characteristics of each piece of plate are different. It is necessary to make the pattern and color gradually extend and transition through the mosaic (color), in order to achieve the overall color harmony. Once the color is spelled, it should be numbered immediately so that it can be placed in place during installation. The number can be directly written on the board surface by sticking the label or using wood crayons, but it is forbidden to use the liquid color pen to mark the surface of the stone board. Otherwise, the colored liquid will penetrate into the stone, leaving traces that cannot be wiped off.
When installing, first apply a layer of clear cement slurry on the floor, then use 1:2.5 cement mortar as the bottom layer, and tamping the leveling, and then pour the cement slurry to paste the stone. The thickness of the cement mortar base layer is preferably not less than 20 mm. Do not walk or press heavy objects within 8 hours after paving the stone to avoid empty shells or unevenness. At the same time, it must be noted that some imported stone has a plastic network attached to the back, and the sheet network must be torn off before installation.
After the renovation, it is best to use a white car wax to apply a thin layer on the stone veneer for maintenance, and then scrub it every two weeks.
Solar Street Light,Outdoor Solar Street Lights,Solar Light,Solar Street Lamp
China Searun Solar Solution Co., Ltd. , https://www.srsolarlights.com