On the afternoon of May 6, Zhang Wen, the deputy director of the municipal key bureau, presided over the on-the-spot scheduling meeting for the safety production of No. 3 teaching building in the Middle School Campus of Lu'an. Safety commissariat of the city, the Middle School of Lu'an District, the second project of the Municipal Key Bureau, the Tiancheng Company's Safety Technology Department, Construction Supervision Company, and the Construction Enterprise Project Department attended the meeting.
Since the construction of No. 3 teaching building at the Middle School campus in Lu'an, an area of ​​the Middle East, has been intensified since the start of January, the main structure has been capped at the end of April. However, some safety production problems have also been exposed on the site. There are serious safety problems, which are mainly manifested in: The erection of external shelves, the erection of staircases, and the installation and use of the gantry have not met the requirements of the specifications. The safety supervision station of the city issued the rectification notice twice in the near future, but the project construction unit did not rectify it in place as required. The meeting was clear and immediate rectification was stopped.
First, we must strengthen awareness of safe production. Safe production is no small matter. The construction of a good and fast project is based on safe production. There is no safe production to talk about. Anhui Tiancheng Construction Co., Ltd. as the key project construction unit should consciously achieve safe and civilized construction and striving for a safe and civilized construction site; Lu'an Construction Engineering Construction Supervision Co., Ltd. as the supervision unit should perform the supervisory duties on behalf of the owners strictly, otherwise it is a serious dereliction of duty.
Second, we must implement responsibility for safe production. The construction unit shall formulate practical and feasible rectification plans, which shall be checked and verified by Tiancheng Safety Technology Department and Supervision Department. The rectification work will be carried out by the Tiancheng Safety Technology Department. The project supervisor of the construction supervision company will supervise the whole process, and the contact person of the key project and the director of the project office shall supervise the project.
Third, we must clearly rectify the working hours. The project was suspended for three days and rechecked through the city security supervision station. However, the time obeyed the task and the task obeyed the effect. The hidden safety problem was not ruled out and the rectification work was not retracted.
Fourth, we must protect the safety of the construction site. The construction of the east-west side corridor to be started will fully take into account the entry into the middle school, college entrance examination, and campus, and the construction of the basic part shall be arranged at night to speed up the progress of the project, and safety protection shall be provided. In particular, a safe passage shall be maintained to ensure the access of teachers and students to safety and the road is unimpeded.
This website solemnly declares: This article is the reprint of the online media, only represents the author's point of view, has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.
A corner reflector is a retroreflector consisting of three mutually perpendicular, intersecting flat surfaces, which reflects waves back directly towards the source, but translated. The three intersecting surfaces often have square shapes. Radar corner reflectors made of metal are used to reflect radio waves from radar sets.
N-BK7 Corner Cube Reflectors are made from precision N-BK7 for use in a variety of visible light applications.
Corner cube retroreflectors are designed to reflect any ray or beam
entering the prism face, regardless of the orientation of the prism,
back onto itself. A mirror will only do that at the normal angle of
incidence. As a result, corner cube retroreflectors are ideal where
precision alignment is difficult or time-consuming. They feature three
total internal reflections and will function even at very large angles
of incidence.
Material | BK7 Optical Glass |
Diameter | 5mm 12.7mm 25.4mm 38.1mm |
Height | 5mm 10mm 29.2mm |
Surface Quality | 60/40 |
Surface Flatness | Lambda/10 |
Bevel | Protective Bevel |
Angle Tolerance | 8' |
Coating | uncoated or silver coating upon request |
Ray Deviation (°) | 180 |
Corner Cube Reflectors,Corner Cube Prisms,Corner Cube Retro Reflector,Corner Cube Prism Reflector, corner cube reflector prism
Changchun Ruiqi Optoelectronics Co.,Ltd , https://www.ruiqi-optics.com