Accepting the wooden floor: it’s important to watch the second

In June and July, it was again at the peak of the closing of the house. In the decoration that followed, many owners would choose wooden flooring. What issues should be paid attention to during the acceptance process?

Look at the color of the wooden floor is consistent. If the color difference is too large, it directly affects the appearance and can be exchanged. If the colors are too consistent and there is almost no chromatic aberration, it depends on whether the pattern on the floor surface is the same. If the patterns are similar, it may be a craft wooden floor, not a so-called precious wood. Nowadays, some wood flooring materials suppliers use ordinary wood-based wood flooring, but they are covered with a layer of precious wood veneer on the surface to shoddy it. The reverse side is covered with aluminum po, which is said to be used for moisture protection. The pattern of the opposite side is inconsistent with the front.

Second, listen to the sound of the wooden floor. During the acceptance, walk back and forth on the wooden floor, the footsteps must be aggravated, especially the wall parts and the door and hole parts should pay more attention to the acceptance, and the parts with sounds should be repeatedly moved to determine the specific position of the sound and mark well. In this case, you can ask to remove the resurfacing. The part with sound is caused by the construction workers during the construction process, the operation is not standardized, the ground keel is not fixed firmly, and the unqualified materials are mainly reflected in the fact that the ground keel is not dried.

Finally, check the surface of the wooden floor for blemishes, cracks, and scratches. It is common because the ground keel is untreated and there are mites inside. When the eye was found to be blinking, the wooden floor had been almost smashed; the gaps and scratches were known at a glance. The specification stipulates that the gap of the wooden floor should not exceed 0.5 mm; the scratch is mainly caused by the rough decoration. If it is still not repaired by the waxing method, it must be exchanged.

Customize Chandelier

LAVIUS is appointed byZhongshan G-Lights Lighting Factory as a high end brand of customized indoor decorative project lighting, locates in lighting capital, Guzhen, China. According to more than one decade exploration, research and development, LAVIUS moving toward to the front high brand of customized project lighting for hotel, club and other high end places.
With immersive experience style outdoor lighting showroom, standard industrial plants and workshops, and all kinds of production, processing, testing equipment, LAVIUS has integrity management, keeps focusing on the challenge and need from clients, and providing competitive solution and service. Client will get maximum benefit continuously from LAVIUS.

Chandelier Light,Wood Chandelier,Plug In Chandelier,White Chandelier

GUANGDONG LAVIUS LIGHTING CO., LTD. , https://www.laviuslighting.com

This entry was posted in on