The full-height switch is actually developed from the triple-roll gate and draws on the characteristics of the revolving door (the biggest difference being that the blocker is not a glass door, but a metal fence). According to the height of the blocker, it can be divided into full-height gate (also called full-height gate or full-height gate) and half-height gate (also called semi-high gate). The full-height gate is used in many applications, including prisons, military management zones and In and out of the management of a very strict factory (such as chemical plants, construction sites, etc.).
When choosing a full-height rotary turn machine, you need to pay attention to the following aspects:
1. Sturdy and impact resistant: The turn bar and the outer guardrail need to be sturdy and able to withstand large destructive forces.
2. Security: The biggest concern with full-height turnstiles is that the audience is locked in the gate and cannot enter or exit. In any case (such as suddenly lost power) must avoid the occurrence of this situation, depending on the principle of design.
3, arm weight, inertia, when the arm is in place, there should be no oscillation phenomenon.
4. Reliability: The reliability of the gate is based on the reliability and integration of the various components of the gate. The selection of good quality components is the basis, such as card readers, controllers, monitors, etc.; the integration method mainly depends on the design selection and communication method of the control unit. The presence or absence of lightning protection components also affects the reliability of the equipment.
5. Rotational life: There will be wear on the moving parts, and the design of the pivotal parts will be well-chosen.
6, the bar code reader above the glass material: above the bar code reader must be transparent, the use of organic glass low cost, easy processing and installation, but after many brush votes, the glass will wear rough, affect the bar code reading speed and accuracy Therefore, wear-resistant quartz glass must be used;
7. Checking speed: The large flow rate of gates is used, and the passing speed of ticket checking is an important indicator. The ticket checking speed depends on the gate control mode, communication networking mode, ticket checking processing software, and mechanical action speed. In general, the gate response speed is within 500ms.
TDZ Tong Dazhi Channel Gate Double Channel Rotary 90 Degree Full Height Turning Turnstiles The external shape of the device adopts GB (304) stainless steel plate stamping molding, which is beautiful in appearance, rustproof and durable, and adopts standard electrical interfaces for external use. It can easily use barcode cards, Card readers such as ID cards, IC cards, and HID cards are integrated into the device to provide a civilized and orderly access to entry and exit personnel, while at the same time preventing the entry of illegal personnel; in addition, the system has also specifically designed functions to meet the requirements of fire protection. In case of emergencies, ensure that the channels are unobstructed and facilitate the timely evacuation of personnel. (Applicable to the community import and export personnel management).
Features
1) With fault self-checking function, it is convenient for user's maintenance and use.
2) There are multiple working modes to choose from, that is, two-way card readers can limit the current, and they can also read cards and disable them in the other direction, while reading cards and being free to pass in the other direction.
3) With bi-directional free-flight power off, the power is automatically restored to the lock function, so as to quickly organize the evacuation of people in case of emergency.
4) After reading the valid card, after the pedestrian enters, the driver can push the switch, and it will reset automatically and bi-directionally. The four doors are always in the closed state. The revolving door rotates 90 degrees each time. 5) It has an automatic reset function. After the card is read, if the passer does not pass within the specified time, the system will automatically cancel the current pass of the passer, and the limited travel time can be set by the administrator.
6) A unique drive system is adopted to lock and unlock the gate in the zero position more accurately and reliably.
7) It has a unified and standard external electrical interface, which can be connected with various reading and writing equipments to facilitate system integration and realize remote control and management through the management computer.
8) It has 485 remote control day gate and closing function to meet the special needs of users and fire safety requirements.
9) The number of people in the direction of passing can be automatically counted, and presented to the administrator in an intuitive LED (optional) way, so that managers can know the number of people in a certain direction.
10) Have a clear traffic direction indication function, with an intuitive LED passer indicating whether or not to pass.
11) With read cassette memory and no memory function, and users can set according to their needs through the motherboard keyboard.
12) Through software settings, the total number of people within the site can be limited to meet the special needs of some special occasions.
13) The entire system runs smoothly and with little noise;
When choosing a full-height rotary turn machine, you need to pay attention to the following aspects:
1. Sturdy and impact resistant: The turn bar and the outer guardrail need to be sturdy and able to withstand large destructive forces.
2. Security: The biggest concern with full-height turnstiles is that the audience is locked in the gate and cannot enter or exit. In any case (such as suddenly lost power) must avoid the occurrence of this situation, depending on the principle of design.
3, arm weight, inertia, when the arm is in place, there should be no oscillation phenomenon.
4. Reliability: The reliability of the gate is based on the reliability and integration of the various components of the gate. The selection of good quality components is the basis, such as card readers, controllers, monitors, etc.; the integration method mainly depends on the design selection and communication method of the control unit. The presence or absence of lightning protection components also affects the reliability of the equipment.
5. Rotational life: There will be wear on the moving parts, and the design of the pivotal parts will be well-chosen.
6, the bar code reader above the glass material: above the bar code reader must be transparent, the use of organic glass low cost, easy processing and installation, but after many brush votes, the glass will wear rough, affect the bar code reading speed and accuracy Therefore, wear-resistant quartz glass must be used;
7. Checking speed: The large flow rate of gates is used, and the passing speed of ticket checking is an important indicator. The ticket checking speed depends on the gate control mode, communication networking mode, ticket checking processing software, and mechanical action speed. In general, the gate response speed is within 500ms.
TDZ Tong Dazhi Channel Gate Double Channel Rotary 90 Degree Full Height Turning Turnstiles The external shape of the device adopts GB (304) stainless steel plate stamping molding, which is beautiful in appearance, rustproof and durable, and adopts standard electrical interfaces for external use. It can easily use barcode cards, Card readers such as ID cards, IC cards, and HID cards are integrated into the device to provide a civilized and orderly access to entry and exit personnel, while at the same time preventing the entry of illegal personnel; in addition, the system has also specifically designed functions to meet the requirements of fire protection. In case of emergencies, ensure that the channels are unobstructed and facilitate the timely evacuation of personnel. (Applicable to the community import and export personnel management).
Features
1) With fault self-checking function, it is convenient for user's maintenance and use.
2) There are multiple working modes to choose from, that is, two-way card readers can limit the current, and they can also read cards and disable them in the other direction, while reading cards and being free to pass in the other direction.
3) With bi-directional free-flight power off, the power is automatically restored to the lock function, so as to quickly organize the evacuation of people in case of emergency.
4) After reading the valid card, after the pedestrian enters, the driver can push the switch, and it will reset automatically and bi-directionally. The four doors are always in the closed state. The revolving door rotates 90 degrees each time. 5) It has an automatic reset function. After the card is read, if the passer does not pass within the specified time, the system will automatically cancel the current pass of the passer, and the limited travel time can be set by the administrator.
6) A unique drive system is adopted to lock and unlock the gate in the zero position more accurately and reliably.
7) It has a unified and standard external electrical interface, which can be connected with various reading and writing equipments to facilitate system integration and realize remote control and management through the management computer.
8) It has 485 remote control day gate and closing function to meet the special needs of users and fire safety requirements.
9) The number of people in the direction of passing can be automatically counted, and presented to the administrator in an intuitive LED (optional) way, so that managers can know the number of people in a certain direction.
10) Have a clear traffic direction indication function, with an intuitive LED passer indicating whether or not to pass.
11) With read cassette memory and no memory function, and users can set according to their needs through the motherboard keyboard.
12) Through software settings, the total number of people within the site can be limited to meet the special needs of some special occasions.
13) The entire system runs smoothly and with little noise;
ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztongvalve.com