Talking about two ways to clear the motor bearing

Source: China Bearing Network Time: 2013-01-11

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Soak the bearing in the oil for 5 10 minutes; hold the inner ring with one hand; change the outer ring with the other hand; the dry oil or anti-rust cream on the bearing will fall off. Then put the bearing into the more hygienic fire oil. Rinse with a soft and soft brush; wash the oil in the balls and gaps; remove it in the petrol once; remove it and put it on clean paper. Clear the spherical ball bearings and short cylindrical roller bearings The ball, bead frame, inner ring and outer ring should be removed.
The removal of the bearing mounted on the shaft; mainly by the method of oiling or spraying with oil gun; the oil that is simply removed is first used with kerosene and then with gasoline, it is difficult to remove the oil; first wash with 100 200 Â°C hot oil Or oil gun eruption; then use gasoline to remove. Must be careful not to scratch the bearing with sharp things: hard grease or rust; avoid damage to the bearing tumbling and groove ring finish; cleaned bearings are wiped dry with a clean cloth .
2, hot oil removal method because of the use of long-term; soft dry oil or anti-rust cream hardened bearings; should be immersed in 100 200 Â° C hot oil; clamp the bearing with pliers; use brush to clean the oil on the bearing. Soft The dry oil or anti-rust paste is melted when heated to 100 200 Â° C; it is simply washed out of the gap of the bearing. Sometimes the bearing is shaken repeatedly in the oil. The oil will also flow away from the gap.
When removing the centripetal spherical bearing of the old motor or the imported motor; the ball, the bead frame and the inner ring should be laterally turned out from the outer ring and then immersed in the hot oil; the roller should also be removed when the short cylindrical roller bearing is removed. , the bead frame, the inner ring and the outer ring are separated.
When hot oil is removed; the temperature of the oil should not exceed 20 Â°C.

Recommend to friends comments close window

Bearing related knowledge

Disassembly of NSK cylindrical bore bearing
NSK imported bearing one-way bearing ferrule processing process
What are the main causes of damage to the NSK bearing cage? What is the primary problem with sliding bearings?
Example of the scale of use of oil-free bearings

This article links to http://
Please indicate the bearing network http://

Previous:NSK bearing loading and unloading force when paying attention to the method Next: KOYO bearing application common problems and solutions

2'' 3'' LED Working Light

2'' 3'' Led Working Light,Led Autolamps Work Lights,Led Work Light For Car,Work Light Car

CHANGZHOU CLD AUTO ELECTRICAL CO.,LTD , https://www.cld-leds.com