Everyone should be familiar with wood-plastic flooring. Wood-plastic flooring is a floor made of wood-plastic composite materials. It has the same processing characteristics as wood, and can be sawed, drilled, and nailed with ordinary tools. It is very convenient. Use like ordinary wood. At the same time, it has the woody feel of wood and the water-resistant and anti-corrosion properties of plastics, making it an excellent outdoor waterproof anti-corrosion building material with excellent performance. The following small series introduces the characteristics of wood-plastic flooring and the laying method of wood-plastic flooring.
First, the characteristics of wood flooring
1, waterproof, moisture-proof
It fundamentally solves the problem that wood products are liable to rot and expand and deform after moisture absorption and moisture in a multi-water environment, and can be used in an environment where traditional wood products cannot be applied.
2, pest control moth
Anti-insect, termite-proof, effectively eliminate pest harassment and prolong service life.
3, colorful
There are many colors to choose from. Both natural wood texture and wood texture, but also according to their own personality to customize the desired color.
4, strong plasticity
The wood-plastic flooring has strong plasticity, and can be very simple to achieve individualized modeling, fully reflecting the personality style.
5, green
High environmental protection, no pollution, no pollution, can be recycled. The product does not contain benzene substances, and the formaldehyde content is 0.2, which is lower than the EO level standard. It is a European-level environmental protection standard. Recyclable use greatly saves the amount of wood used, is suitable for the sustainable development of the national policy, and benefits the society.
6, high fire resistance
Wood-plastic flooring can effectively fire-retardant, fire rating to B1 level, self-extinguishment in the event of fire, does not produce any toxic gases.
7, good machinability
Available, planed, sawable, drillable, surface paintable.
8, construction facilities
The installation is simple, the construction is convenient, no complicated construction process is required, and installation time and cost are saved.
9, good stability
No cracking, no expansion, no deformation, no maintenance and maintenance, easy to clean, save the cost of later maintenance and repair.
10. Soundproofing
Sound-absorbing effect is good, energy-saving is good, so that the indoor energy-saving up to 30%.
Second, the common specifications of wood flooring
72*12 splicing floor 100*20 solid floor 100*25.8 outdoor floor
125*23 outdoor floor 135*25 hollow plastic floor 139*23 floor
140*21 outdoor floor 140*23 outdoor floor 140*23.5 three arches
140*25 outdoor floor 140*25 solid floor 140*25 six-hole floor
145*25 four-hole hollow floor 146*31 four-hole hollow plastic floor 150*25 hollow plastic wood floor
146*22 four-hole floor 140*35 hollow floor 140*35 solid floor
150×50 solid wood flooring 96×26 solid wood flooring 146×20 solid wood flooring
140×23 Eight holes round floor 140×40 hollow plastic floor 140×40 solid plastic floor
150×50 hollow wood flooring 150×25 solid wood flooring 146×20 solid wood flooring 145×30 solid wood flooring
Third, wood plastic floor laying method
1. Wood-plastic flooring is usually favored from the entrance of the room to the room or from one side to the other.
2, in the wood-plastic flooring before the floor to be laid on the ground floor for inspection and repair. Although wood-plastic flooring has the effect of waterproof, moisture-proof and mildew-proof, Senmao Wood-plastic recommends that residents living in one floor should learn more about the conditions of the four-season ground resurfacing. If the regain is serious, you must first apply a layer of waterproof asphalt or asphalt oil.
3, in order to lay the floor can be beautiful, in the laying of wood-plastic flooring before we have to do a good job of planning and design of the axis, the central axis is laying the floor of the floor. Especially when laying several rooms in the same unit at the same time, the design of the axis is more important. Specific approach can consult a field master.
4, the laying of the wood-plastic flooring blocks carefully according to the quality of the color, the depth of color sorting once. Good quality, consistent color, as far as possible in the center of the house and conspicuous place, usually on-site master will be informed verbally.
5. The starting point for laying wood-plastic floorboards must be laid out in a regular, stable, and solid manner. The starting point for both the floor and the flat floor must be glued together.
6. When laying wood-plastic floorboards, the four prongs and four prongs of each board must be kept parallel and perpendicular to each other. There can be no mistake, because with the expansion of the paved area, the error also increases.
7. Laying special attention to the vertical and horizontal direction of the floor block texture in order to avoid the aesthetic impact caused by improper laying.
Having said the installation method, we should also pay attention to how to protect and care for these floors in daily life. Senmao wood-plastic flooring is guaranteed to be used under normal conditions (remote cleaning, no artificial damage), and generally does not occur in five to ten years. Warp, deformation, cracking, discoloration and other phenomena, and its service life can reach decades.
Features of wood-plastic floor outdoor wood-plastic floor wood-plastic floor
Swing Check Valve with bolt bonnet type is the best popular type shut off valve in any kind of low pressure industrial pipelines to prevent backflow of the working medium. The pressure is from class 150(PN16) to Class600(PN100) matching valve size from 2"(DN50) to 48"(DN1200). Normally swing check valve open and close by working medium automatically.
Swing Check Valve,Pressure Seal Check Valve,Din Standard Check Valve,Asme Standard Check Valve
Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com