Basic knowledge of gas alarm

First, gas alarm alarm processing methods

When the gas alarm alarms (the red light is on, the buzzer is called), the following processing shall be made immediately:

1. Close the gas pipeline main valve or bottle gas main valve;

2, open all doors and windows, let the gas emit room;

3, do not touch any electrical switch, plug, telephone, doorbell;

4. Never use matches to extinguish all fires;

5, do not use the fire test leak source;

6. Do not cut off the alarm power supply. After the leaked gas disappears, the alarm will automatically stop the alarm;

Second, the gas alarm test

Wet the alcohol with a cotton ball near the lower right corner of the alarm (probe). The 3 seconds alarm emits a crisp loud pulsation alarm, which means that the detector is working properly. (One test per week to ensure reliable operation of the detector)

Third, the simple maintenance of gas alarm

Every 6 months, the detector needs to be cleaned once to ensure good working efficiency. Turn off the power first, then use a soft brush to sweep the dust, and then start the power supply.

Fourth, the use of matters needing attention

1, can not use chemical spray direct cleaning

2. Do not use substances with pungent odors near the alarm, such as hair gel, insecticides, paints, adhesives, lots of wine, etc.

3, ban the use of water or let the water into the alarm

4, do not arbitrarily throw the alarm, drop, disassemble decomposition