The basin water pipe is usually hidden in the bathroom cabinet, so it is usually difficult to see, but you can not just ignore it. Nowadays, under the different needs of people, there are many types of products under the basin. Under-basin plumbing is also part of the family pipeline that is more prone to problems, but it is generally a minor issue. The following small series to introduce to everyone the classification of a basin under the water pipes and basin installation method.
Basin classification of water pipes
1, basin basin under the material classification
1, plastic water pipe: This type of water pipe is usually made of high-quality PP plastic, can be bent freely, good toughness, almost free of space constraints, and cheaper prices.
2, stainless steel water pipes: stainless steel is the appearance, in fact, this type of sewage pipes are mostly made of stainless steel and ABS engineering plastics, with strong corrosion resistance, not easy to aging, easy installation, fast and durable, long service life, etc. It is slightly more expensive than the plastic basin drain.
2, basin basin under the shape classification
1. Linear water pipe: The linear water pipes are all made of “one†shape design. The surface is mostly made of corrugated design, so you can bend freely to reduce the space constraints.
2, S-shaped water pipe: This basin water pipe is commonly known as deodorant downpipe, the shape is more beautiful, the surface has the same water ripple design, compared with the straight downpipe, the bendability of the S-shaped downpipe can be ignored.
Basin water pipe installation method
In fact, it is a very simple matter to install the basin water pipe. The installation of the basin water pipe is generally the last step after the basin water trap and the basin are installed and fixed. It is also the last step in the entire basin installation process. Specific steps are as follows:
1, to ensure that the basin and basin basin water device have been installed;
2, open the purchase of the basin water pipe packaging;
3, one end of the basin water pipe is specifically connected with the basin water filter, the plastic head of this head is unscrewed;
4. Screw the plastic head unscrewed onto the basin water dispenser;
5. Put the basin water pipe on the basin water dispenser and tighten it with the plastic head screwed on the water filter in advance;
6. If the water leakage test leaks, if there is leakage phenomenon, you can wrap the raw material belt at the junction between the water launcher and the down pipe, and then perform the fifth step.
The above information about the classification of basin water pipes and the installation method of basin water pipes is introduced here briefly. I hope to help you. For more information, please visit this website. Stay tuned.
Washbasin bathroom washbasin
Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.
The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).
Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . and produces in accordance with the transition range and the height in the factory buildings or warehouses.
Doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).
Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.
Industrial Sectional Door,Industrial Overhead Sectional Door,Industrial Warehouse Sectional Door,Industrial Garage Interior Sectional Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com