The white light-transmitting soft film ceiling is milky white, and the light transmittance reaches 65-70%. It is milky white that the light does not turn on during the day. It is invisible to the back of the lamp. After the white light film turns on, it will show a soft lighting effect that is closest to natural light. White translucent film is good at creating a warm and clean atmosphere. If you want to achieve the best light effects, it is related to the choice of lamp, the lamp arrangement, the distance between the lamp and the film. Following Xiaobian to see how the white light-transmitting soft film ceilings are arranged.
How to arrange the white light-transmitting soft film ceiling
1. The distance between the flexible film and the lamp should be 20-750px. The distance between the lamps should be equal to the distance between the lamps and the soft film. The distance between the lamps is large, and the distance between the lamp and the flexible film is large, and vice versa. If the lamp is too close to the ply (<375px), uneven light will appear. Figure 1:
The appropriate distance, that is, the distance between the lamp and the flexible film is 20-30cm, which can create even and soft light effects. Figure 2
2, the choice of lamp can be used fluorescent tube, LED tube can also be used, it is recommended to use LED lamp, because the power consumption and failure rate are greatly reduced, LED energy consumption is a quarter of the ordinary T5 lamp , life is 10 times that of ordinary T5 lamp.
3. Before the flexible membrane is installed on the transparent membrane, the soft membrane upper space or the styling base should be sealed to reduce the effect of mosquito dust entering the light transmission. Glass glue can be used to seal at the keel and wall joints.
4. The arrangement of the lamps can be horizontal or vertical. But the key is to arrange evenly, the lamp and the head of the lamp overlap. This will not appear in the shadow of the lamp. As shown in Figure 3:
5, soft film lights can be varied and colorful, in order to fully demonstrate the role of the soft film, you can work hard in the light. Different color lights can be placed in the same lamp slot to control the light to create a variety of different dream effects. Figure 4:
Editor's summary: The relevant information about the white light-transmitting soft film ceiling was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Coated board ceiling decoration materials decoration materials knowledge decoration materials list
4 Inch Floor Trap,4 Inches Floor Drain,Stainless Steel 4 Inch Floor Trap,4 Inches Square Shower Drain
Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.jqfloordrain.com