A large proportion of tiles are laid in home improvement, especially in the kitchen area. However, paving tiles is a technical task. Once the tiles are not laid, it is easy to appear empty and fall off, which affects the use and affects the overall appearance. So, how to tiling is better? What do you need to pay attention to when tiling? The following is a detailed explanation by everyone.
How to tiling
1. Tile soaking
How to lay tiles? Be sure to clean the stains on the surface of the tiles before tiling, and then soak them in clean water. The immersion time should be at least 2 hours. This is to make the tiles fully absorb moisture, so that the tiles are laid It will not absorb the moisture in the material, and will not cause the material to be stuck firmly due to water loss, resulting in the phenomenon of shedding and emptying.
2. Set the auxiliary line
After the tiles fully absorb moisture, it is time to set up auxiliary lines. In order to ensure that the surface of the tile after laying is flat and can be kept horizontal and vertical, it is necessary to hang a vertical line on the leveling layer of the wall, and then set a horizontal line, so that the tile after laying is beautiful.
3. Set up support planks
When laying tiles on the wall, be sure to use the horizontal line as the guideline, and then set up the supporting board. The reason for this is to avoid the falling or displacement of the tiles before they reach the adhesive strength.
4. Paving in order
After the above work is ready, the next step is to lay tiles. However, it should be noted that when laying tiles, they must be laid in order. First, the tiles should be laid from the door and window, then from bottom to top, from left to right. After the leveling layer of the wall is ready, use a shovel to apply cement mortar to the back of the tile, and then stick the tile directly to the wall. After the tiles are laid, be sure to tap the surface of the tiles with a rubber hammer or shovel handle, so that the adhesion of the tiles will be stronger and there will be no falling off.
5. Cleaning and maintenance
After the tiles are laid, it is necessary to clean up some dust and stains on the surface of the tiles. If the stains on the surface of the tiles are difficult to clean, you can use 10% concentrated dilute hydrochloric acid solution to clean it, and then clean it with clean water.
What to pay attention to when tiling
1. If the floor tiles are paved, it is necessary to pay attention to the sewer pipe before laying tiles. Because the exposure of the sewer pipe will not only affect the appearance, but also have a loud sound when the water is discharged, so be sure to guarantee the pipe before laying the tiles. In order to reduce the noise of the water, the sewer pipe can be wrapped with soundproof cotton and then built with bricks.
2. If the tiles in the kitchen and bathroom area are laid, it is necessary to pay attention to the waterproof treatment. In addition, the tiles cannot absorb moisture after they are waterproofed, so use tile glue to reinforce the tiles so that the tiles will not fall off.
3. The order of tiling in home improvement is to lay the wall first, then the floor, indoor first, then the door, and wait for it to dry before stepping on.
Summary of the article: How to lay tiles ? The above editor has made a detailed explanation, hoping to help everyone. However, you must pay attention to the above items when laying tiles, so that the laid tiles will not appear empty and fall off, so as to be more perfect.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
Self drilling Screw made of 410 stainless steel, high hardness (40 Rockwell C), steel process.
Drilling screw is also very strong hardness, compared to the ordinary screw up, not only to maintain the ability is good, the connection object effect is also very strong, for the performance of the screw, are generally does not need auxiliary processing, can be directly on the object directly drill a Kong Sue into objects, not just use rise very convenient, Also can greatly improve the efficiency of work. This kind of drilling screw can be said to be the first choice of workers in various fields.
So what is the use of drilling screws?
1 stainless steel plate, metal plate, galvanized steel plate, engineering installation.
2 metal curtain wall metal light compartment and other indoor and outdoor installation.
General Angle steel, channel steel, iron plate and other metal materials combined installation.
4, automobile, container, shipbuilding, refrigeration equipment and other assembly projects.
Self drilling screw,hex Self drilling screw,truss Self drilling screw,flat Self drilling screw,pan Self drilling screw
Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com