1) Set the machine number:
You can set the fingerprint scanner's machine number range from 1 to 255; set the machine number to facilitate the background statistical analysis of different patrol inspection records.
2) Set management fingerprint:
When entering the system setup function interface, the system must verify the management fingerprint. If it is not set, you can press the ENT key to set it; you can also press the F1 key to skip and temporarily set the management fingerprint. There is only one fingerprint for management.
3) Other function settings Other function settings will be expanded to include: whether strict order inspection; multiple fingerprint verification and other function parameters.
4) Registered patrol points The patrol points need to be downloaded to the patrol device after being set by the back-end management software. You can also register the inspection point temporarily. The operation procedure is to input the valid number first and then read the information point; the system supports continuous batch registration.
5) Registering fingerprints You can register fingerprints of all personnel through a handheld computer and upload them to a computer. Then, the fingerprint information and name and number of the inspection personnel set on different routes are passed down to the corresponding fingerprint inspection device.
The procedure for registering a fingerprint is to enter a valid personal number first and then capture the living fingerprint; the system supports continuous batch registration.
6) Data communication Data communication will cause the patrol unit to wait for data upload. At this time, the inspection device is connected with the computer through the data line, and the relevant data information in the inspection device is uploaded through the background management software.
You can press [F1] to exit the communication state.
7) Modify date and time The patrol local time and date can be modified. If the patrol time is inaccurate, you can modify it directly here, or you can disable this function and perform related operations in the background management software. Select the “Also modify date/time†function to complete clock synchronization at the same time in data communication.
8) System initialization In order to avoid the easy implementation of the system initialization operation, the system initialization menu item is not displayed in the system setting function menu. The operator must press the “C†key, enter the security control password and verify the management fingerprint before performing the system initialization operation.
You can set the fingerprint scanner's machine number range from 1 to 255; set the machine number to facilitate the background statistical analysis of different patrol inspection records.
2) Set management fingerprint:
When entering the system setup function interface, the system must verify the management fingerprint. If it is not set, you can press the ENT key to set it; you can also press the F1 key to skip and temporarily set the management fingerprint. There is only one fingerprint for management.
3) Other function settings Other function settings will be expanded to include: whether strict order inspection; multiple fingerprint verification and other function parameters.
4) Registered patrol points The patrol points need to be downloaded to the patrol device after being set by the back-end management software. You can also register the inspection point temporarily. The operation procedure is to input the valid number first and then read the information point; the system supports continuous batch registration.
5) Registering fingerprints You can register fingerprints of all personnel through a handheld computer and upload them to a computer. Then, the fingerprint information and name and number of the inspection personnel set on different routes are passed down to the corresponding fingerprint inspection device.
The procedure for registering a fingerprint is to enter a valid personal number first and then capture the living fingerprint; the system supports continuous batch registration.
6) Data communication Data communication will cause the patrol unit to wait for data upload. At this time, the inspection device is connected with the computer through the data line, and the relevant data information in the inspection device is uploaded through the background management software.
You can press [F1] to exit the communication state.
7) Modify date and time The patrol local time and date can be modified. If the patrol time is inaccurate, you can modify it directly here, or you can disable this function and perform related operations in the background management software. Select the “Also modify date/time†function to complete clock synchronization at the same time in data communication.
8) System initialization In order to avoid the easy implementation of the system initialization operation, the system initialization menu item is not displayed in the system setting function menu. The operator must press the “C†key, enter the security control password and verify the management fingerprint before performing the system initialization operation.
Brass is a special copper alloy. Brass is an object made of an alloy of copper and zinc. It gets its name from its yellow color. Brass with 56% to 68% copper has a melting point of 934 to 967 degrees. Brass has good mechanical properties and wear resistance. Because of its unique advantages, it has become an important part of the parts manufacturing industry. It is generally used for precision copper parts such as automobile parts, medical parts and electrical parts.
Brass Precsion Turned Parts,Brass Precision Parts,Brass Turned Components,Brass Precision Turned Parts
Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com