It is said that buying furniture is a knowledge. If you are buying solid wood furniture, you need to examine it carefully when choosing. Because there are many types of solid wood in the furniture market, and the furniture chaos is very serious. The editor teaches you a few points to easily purchase high-quality solid wood furniture.
How to distinguish whether it is solid wood material?
The important point to judge whether solid wood furniture is wood grain and scars. If the appearance of the furniture looks like a pattern, then follow the position of this pattern change and see if there is a corresponding pattern on the back. If it corresponds well, it means pure solid wood furniture. In addition, looking at wood scars is also a good way to identify solid wood: also look at the location of the scarred side, and then look for corresponding patterns on the other side.
What are the common solid wood materials? Material directly affects the price and quality of furniture. Ordinary solid wood furniture usually uses beech, white oak, ash, elm, catalpa, rubber wood, oak wood, while the relatively expensive mahogany furniture mainly uses rosewood, wenge, and red sandalwood. The market for solid wood furniture is worrisome, and there are often things that are sub-optimal and confusing materials. Therefore, it is best for consumers to buy brand-name products. At the same time, it should be noted that the price of wood is increasing day by day. Too cheap is generally not reliable.
How to distinguish the quality of solid wood? Open the furniture cabinet door and drawer to observe whether the wood is dry and white, whether the texture is tight, even and delicate. The editor reminds that if the furniture is made of chipboard, MDF and one-time molding board, it is necessary to open the cabinet door or drawer to smell if there is an irritating smell.
Observe the wood for defects The load-bearing capacity of the furniture is very important, so there can be no errors in the legs, columns and other parts. The structure must be firm, the frame must not be loose, and the tenon and material should not be broken. The parts of the artificial board used in the furniture should be strictly edge-sealed, and the installation of various accessories must be indispensable, missing nails, and through nails.
Observe the strength of the board The strength of the board can be directly pressed with fingers to feel the fastness of the board. One side of the material should be fixed with a T-shaped frame. If the frame is sparse, the surface will feel unreal and the panel will vibrate obviously; the drawer bottom plate should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered and the partition is large. Should be made of five-layer board. The opening and closing of cabinet doors and drawers should be flexible. When the panel is covered with thin wood and other materials, the color and color of the complete set of products should be similar, and the paint film on the surface of the product should not be wrinkled, tacky or leaking.
Check stability and security Observe whether the drawer or door frame is tilted, whether the tenon is distorted, or the eye is too large, and the tenon is not strict. According to the editor, wooden furniture must have certain safety and stability. When the two cabinet doors are opened 90 degrees, gently pull in the direction of their own, the cabinet body should not automatically tilt forward; the bookcase The glass of the door should be edged; the back mirror should be installed on the dressing mirror and dressing table, and the glass should be firmly fixed by the bead. Individual parts of furniture (such as legs, drawers, cabinet doors, or brackets, etc.) must be strong enough to support. You can gently push the upper corner of the furniture or sit on the side to try the stability of the furniture.
Check if the surface is smooth Gently rub your hands against the surface of the furniture, and carefully check whether the polished surface is smooth, especially to avoid the roughness of the legs and other parts, whether the paint is painted with streaks, whether the corner paint is too thick, whether there are cracks or bubbles.
Turn the furniture over and observe Turn the chair and cushioned furniture upside down and see how they are made. The editor suggested that the table also needs to be checked from the bottom. See if the seam is reinforced with screws and wedges, whether the slat and buckle are tightly connected with the crosspiece, and whether the seam has excess glue and filler.
Zhejiang Changxing Senda Bamboo & Wood Products Co.,Ltd , https://www.sendaflooring.com