Four fertilizers of crops

Chemical fertilizers can only achieve the purpose of increasing production if they are properly applied. If the application of chemical fertilizers is not suitable or the application method is improper, it will often lead to crop yield reduction, which is often said to be fat.
Dehydration-type fertilizer is mainly caused by excessive application of chemical fertilizer at one time, or insufficient soil moisture, and the concentration of fertilizer solution in the soil is too large after fertilization, causing reverse osmosis of water in crop cells, resulting in dehydration of crops. Fertilized plants show wilting, like frost or boiling water. Lightness affects growth and development, and heavy plants die.
The smog-type fertilizer is mainly applied with ammonia, bicarbonate and other fertilizers. Such fertilizers are applied at high temperatures, which are prone to produce a large amount of ammonia gas, causing damage to crops, and lighter yellowing of the lower tip, affecting growth and development. The heavy ones caused the whole plant to die.
Burning seed type fertilizer application too much amount of fertilizer, or use superphosphate, or alkaline volatile ammonium bicarbonate and urea, lime nitrogen and other chemical fertilizers, often burning, resulting in lack of seedlings. In addition, when foliar fertilization is applied, the concentration used is too large, which may cause leaf burns.
Toxic fertilizers Some fertilizers such as lime nitrogen are toxic fertilizers. After being applied to the soil, they must undergo a series of transformations before they can be absorbed by plants. However, during the conversion process, some toxic substances will be produced to poison crops and cause them to be killed or killed. Therefore, the application amount should be strictly controlled when applying fertilizer, and the fertilizer should be used safely and rationally.

Huaxian Liu Huimin
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

LED Underground Lamp

LED Underground Lamp is a new type of buried decoration lamp with high brightness LED as the light source and LED constant current drive as the driving mode.Widely used in square, park, leisure places, such as outdoor lighting, outdoor as well as park, square, garden greening, lawn, flower beds, pedestrian street, waterfalls, fountains, water etc illumination, add luster for life.

LED Underground Lamp

Product size

LED Underground Lamp

Technical parameters

Main material

High - pressure cast aluminum, 92% high - light steel screen printing glass

The light colored temperature

Red/Green/Yellow/Amber/Vermilion/Acid blue/3000K/4000K/5000K/6000K

Surface treatment

UV Polyester powder coating

Light distribution device

Reflector lamp cup series:6°

Optical lens series:8°/15°/25°/45°/10×30°/10×60°/20×40°

The light body color

Dark grey

Working voltage

DC24V

Safeguard procedures

Silica gel ring compacted waterproof

way to install

Embedded part

Average lifetime

350mA20000hours,500mA15000hours

rated power

/

Control mode

/

Level of protection

IP65

operating ambient temperature

-25℃~50℃

Working environment humidity

10%~90%






Led Underground Lamp ,Led Underground Headlamp,Led Cap Lamp Underground Mining,Underground Led Cap Lamps

Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com

This entry was posted in on