Used to combine mounting panels, inserts, insert boxes, electronic components, devices, and mechanical parts and components to form an integral mounting box. The console consists of a frame and a cover (door), which generally has the shape of a cuboid and is placed on the floor. It provides a suitable environment and safety protection for the normal operation of electronic devices. This is second only to the system-level primary assembly. A console that does not have a closed structure is called a rack.
skills requirement:
1 should have good technical performance. The structure of the console should be based on the electrical and mechanical properties of the equipment and the requirements of the use of the environment, the necessary physical design and chemical design, to ensure that the structure of the console has good stiffness and strength and good electromagnetic isolation, grounding, noise isolation, Ventilation and heat dissipation performance In addition, the console should be resistant to vibration, impact, corrosion, dust, water, radiation, etc., in order to ensure stable and reliable equipment.
2 It should have good usability and safety protection facilities to facilitate operation, installation and maintenance, and to ensure operator safety.
3 should be easy to produce, assembly, commissioning and packaging and transportation.
4 should meet the requirements of standardization, normalization and serialization.
5 beautiful appearance, application, color coordination.
Basic types and structure:
Most of the consoles used in the early days were made of castings or angle steels that were bolted or riveted into a console frame, and were made of a cover plate (door) made of sheet steel. This console is bulky, heavy, and unsophisticated and has been eliminated. With the use of transistors and integrated circuits, and the miniaturization of various components and devices, the structure of the console has also grown toward miniaturization and building blocks. The console has evolved from the previous full-panel structure into a series of plug-in and plug-in configurations. The assembly method of the subrack and plug-in
Most of the consoles used in the early days were made of castings or angle steels that were bolted or riveted into a console frame, and were made of a cover plate (door) made of sheet steel. This console is bulky, heavy, and unsophisticated and has been eliminated. With the use of transistors and integrated circuits, and the miniaturization of various components and devices, the structure of the console has also grown toward miniaturization and building blocks. The console has evolved from the previous full-panel structure into a series of plug-in and plug-in configurations. The assembly method of the subrack and plug-in
Horizontally and vertically. The console material is generally made of thin steel plate, steel profiles of various cross-sectional shapes, aluminum profiles and various engineering plastics. In addition to welding and screw connection, the frame of the console also uses a bonding process.
The operating table can be divided into two basic structures, namely profile and sheet, depending on the weight of the components, the materials, and the manufacturing process.
1 profile structure console: There are two types of steel profile console and aluminum profile console. Steel-shaped material operating table by the special-shaped seamless steel pipe for the column. This console is very good in rigidity and strength and is suitable for heavy equipment. The aluminum profile console consisting of aluminum alloy profiles has a certain degree of rigidity and strength and is suitable for general or light equipment. The console is light in weight, has a small amount of processing, and has a beautiful appearance and is widely used.
2 sheet structure console: the entire plate console, the side plate is a whole piece of steel bending forming. This kind of console has good rigidity and strength and is suitable for heavy or general equipment. However, due to the non-removable side panels, assembly and maintenance are inconvenient. The structure of the curved column-type console is similar to that of the profile console, and the column is formed by folding the steel plate. This console has a certain degree of rigidity and strength and is suitable for general equipment.
304 Stainless Steel Shower Set
DQOK is a bathroom factory specializing in the production of stainless steel shower sets. We have sundry multi-functional Shower Set. All products have patents, avant-garde design and unique innovation. Dingquan bathroom will be your priority
304 Stainless Steel Shower Set,Brushed Stainless Steel Shower Set,Stainless Shower Set,Steel Shower Set
Heshan Dingquan Sanitary Ware Industry Co., Ltd , https://www.dqoksanitary.com