Some consumers will be affected by reasonable ideas and social misconceptions when they purchase solid wood flooring or solid wood furniture. In the subconscious, they must think that the heavier the floor, the better, the weight of the wood, the heavier the wood. OK, is this true?
Misunderstood to see clever good practice is wrong! The weight of the wood is related to the air-dry density. The finer the wood fiber, the higher the air-dry density of the floor and the heavier the weight. However, the heavier the water-absorbing expansion rate of the floor is, the higher the shrinkage rate is. In other words, the heavier the floor denaturation is.
A very smart customer, when the Purchasing Guide said that red oak was heavier and more stable than mahogany, he took a piece of red oak and mahogany and put it in water for experimentation. The oily floor was also in the water. After soaking for three days, Red Oak swelled more than mahogany.
The relationship between stability and weight is minimal. In fact, the oily nature of the wood fiber has long-term impregnation, so that each subtle part of the floor has the nature of not afraid of water. In terms of the stability of the floor, it is not related to the weight. From the actual use of results, the heavier and more stable the floor, the conclusion is not accurate.
Coincidentally, when people buy solid wood furniture, they will encounter some unprofessional rhetoric. “You see that our rubber-wood partitions are so heavy. You have to use your hand to draw them. There is no seal. This shows that the wood is good.†“You see that our wood is very heavy and extremely hard. It is second only to mahogany, and the quality is good.†When some consumers ask about the stability of furniture, salesmen will all say that the wood they use has a large hardness, so it is stable. Excellent.
The Right View Listen to Sun Shudong How to say Sun Shudong, director of the Furniture Inspection and Wood Identification Laboratory at the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, said that the statement that the density of wood is more stable and stable is purely foolproof. Like some well-stabilized woods such as teak, pineapple, mahogany, etc., their density is not high, and the high density and quality are not necessarily proportional to the relationship, not high density can be called good wood.
There is indeed a problem of wet shrinkage and shrinkage of wood, but if the production process is in place, the wood is dried properly, and the joints are left in place, and solid wood furniture and solid wood flooring are difficult to crack and deform. For example, in the production process of solid wood flooring, the most critical step is the wood drying process. If the drying is not done well, the resulting floor will be easily cracked and deformed. If it is dried in place, the wood itself will be relieved of stress and will not be deformed. , cracking problem.
The dry and healthy balance and elimination of the G-spot solid wood floor takes about 30 to 40 days to allow the natural moisture content of about 30% to dry; about 10 to 30 days, so that the moisture content reaches artificial drying below 10%. At the same time, the pulp in the wood is distilled out to equalize the cell wall structure of the wood, and the dry shrinkage performance tends to be stable and consistent; and the 10 to 20 days health treatment achieves the balanced moisture content required to meet the environmental characteristics of the used area, eliminating the growth of the wood and The internal stresses that are present and produced during processing are such that the solid wood floor is very stable.
Misunderstanding to choose to open eyes to see clearly
1
On the two purchases of pounds and the two pounds on pounds:
The quality of the floor cannot be measured by weight;
2
On long and short purchases, on narrow and narrow sales:
Floors cannot be bought and sold in terms of size, and relatively small floors have better stability.
3
Blind pursuit of tree species luxury:
The rare tree species are rare and need to find a brand with a rich history;
4
The cheaper the better:
Some small manufacturers openly sell inferior products and unqualified products on the basis of discounts, promotions, and price cuts. Please open your eyes and listen to other people's opinions. Don't be fooled by those businesses.
Solid wood flooring is a floor decoration material formed by drying and processing natural wood. The natural wood texture and color pattern it presents gives a natural, soft and rich texture. At the same time, because it does not contain formaldehyde, it is warm in winter and cool in summer, and it has good touch characteristics, making it a bedroom, living room, and study floor. The ideal material for decoration.
Misunderstood to see clever good practice is wrong! The weight of the wood is related to the air-dry density. The finer the wood fiber, the higher the air-dry density of the floor and the heavier the weight. However, the heavier the water-absorbing expansion rate of the floor is, the higher the shrinkage rate is. In other words, the heavier the floor denaturation is.
A very smart customer, when the Purchasing Guide said that red oak was heavier and more stable than mahogany, he took a piece of red oak and mahogany and put it in water for experimentation. The oily floor was also in the water. After soaking for three days, Red Oak swelled more than mahogany.
The relationship between stability and weight is minimal. In fact, the oily nature of the wood fiber has long-term impregnation, so that each subtle part of the floor has the nature of not afraid of water. In terms of the stability of the floor, it is not related to the weight. From the actual use of results, the heavier and more stable the floor, the conclusion is not accurate.
Coincidentally, when people buy solid wood furniture, they will encounter some unprofessional rhetoric. “You see that our rubber-wood partitions are so heavy. You have to use your hand to draw them. There is no seal. This shows that the wood is good.†“You see that our wood is very heavy and extremely hard. It is second only to mahogany, and the quality is good.†When some consumers ask about the stability of furniture, salesmen will all say that the wood they use has a large hardness, so it is stable. Excellent.
The Right View Listen to Sun Shudong How to say Sun Shudong, director of the Furniture Inspection and Wood Identification Laboratory at the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, said that the statement that the density of wood is more stable and stable is purely foolproof. Like some well-stabilized woods such as teak, pineapple, mahogany, etc., their density is not high, and the high density and quality are not necessarily proportional to the relationship, not high density can be called good wood.
There is indeed a problem of wet shrinkage and shrinkage of wood, but if the production process is in place, the wood is dried properly, and the joints are left in place, and solid wood furniture and solid wood flooring are difficult to crack and deform. For example, in the production process of solid wood flooring, the most critical step is the wood drying process. If the drying is not done well, the resulting floor will be easily cracked and deformed. If it is dried in place, the wood itself will be relieved of stress and will not be deformed. , cracking problem.
The dry and healthy balance and elimination of the G-spot solid wood floor takes about 30 to 40 days to allow the natural moisture content of about 30% to dry; about 10 to 30 days, so that the moisture content reaches artificial drying below 10%. At the same time, the pulp in the wood is distilled out to equalize the cell wall structure of the wood, and the dry shrinkage performance tends to be stable and consistent; and the 10 to 20 days health treatment achieves the balanced moisture content required to meet the environmental characteristics of the used area, eliminating the growth of the wood and The internal stresses that are present and produced during processing are such that the solid wood floor is very stable.
Misunderstanding to choose to open eyes to see clearly
1
On the two purchases of pounds and the two pounds on pounds:
The quality of the floor cannot be measured by weight;
2
On long and short purchases, on narrow and narrow sales:
Floors cannot be bought and sold in terms of size, and relatively small floors have better stability.
3
Blind pursuit of tree species luxury:
The rare tree species are rare and need to find a brand with a rich history;
4
The cheaper the better:
Some small manufacturers openly sell inferior products and unqualified products on the basis of discounts, promotions, and price cuts. Please open your eyes and listen to other people's opinions. Don't be fooled by those businesses.
Solid wood flooring is a floor decoration material formed by drying and processing natural wood. The natural wood texture and color pattern it presents gives a natural, soft and rich texture. At the same time, because it does not contain formaldehyde, it is warm in winter and cool in summer, and it has good touch characteristics, making it a bedroom, living room, and study floor. The ideal material for decoration.
PCBN Inserts standard specifications:
2 tips PCBN Inserts:CNGA120408T02020
3 tips PCBN Inserts:CNGA160408T02020
Full face PCBN inserts:CNGN120408T02020
PCBN Inserts features:
- Precision ground cutting edge.
- 3 types of edge finish to suit different machining needs.
- Imported and high quality domestic PCBN material with excellent resistance to chipping and wear.
- International M grade accuracy.
Cast Iron Big Steel Ball,Pcbn Inserts For Hardened Steel,Pcbn Insert For Cutting Tools,Pcbn Inserts For Hollow Shaft
Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com