1, partial load adjustment (corner adjustment)
After the meter enters the weighing state, partial load adjustment can be performed. With a certain weight weight (usually one-fifth of the maximum weight), order pressure angle, so that the display value of each corner of the error does not exceed the allowable error, such as the excess can be adjusted by modifying the angle coefficient until the octagonal display consistent. The adjustment of the octagonal coefficient can also be accomplished by automatically adjusting the angle coefficient.
2. Zero reference adjustment Once the electronic truck scale is installed or overhauled for the first time, the zero reference must be re-determined. Press the “Zero†button when emptying the scale, or enter the menu to perform zero calibration.
3. Span adjustment Span adjustment actually adjusts the linear slope. If the actual input display value is shown by a dotted line, the range adjustment function of the meter can be used to make the output linear to meet the ideal state.
The fine tuning steps are as follows:
1) Before adopting the span adjustment function, the standard calibration must be set first. Although the minimum value of the test weight does not have to be greater than 10% of the full scale, the actual weight used should be as many as possible.
2) Enter execution zero calibration.
3) Load the known silicon code on the weighing platform and perform the span calibration.
How can the truck scale be adjusted? What can I do if weighing is not possible? These problems are common and solutions:
1. First, check whether the two ends of the truck scale are touching the base wall (the gap between the two sides of the scale must have a gap of 2 cm); if so, keep a certain gap to avoid touching, and check whether the LCD pin and the hole position are oxidized or cold welded. Short circuit.
2. Check whether the sundries under the body of the truck scale are stuck; because this is often the root cause of inaccurate weighing. If there is any debris, clean it immediately.
3. Check the weighing sensor on each corner of the truck scale to see whether the reading weighing structure is the same and whether there is an angle deviation. If each angle reading is not the same, adjust the potentiometer to keep the corner difference consistent. Can be solved.
4, check the weighing is not allowed is not accurate, is the inconsistent weighing data every time the car, or four feet said to be inaccurate, there are related to a certain value to determine whether the electronic truck scale can be maintained.
Thank you very much for your attention to our products. If you are interested in or have questions about this electronic truck scale, please click on the online customer on the right side of the page, or we believe that: With your suggestions and help, we will do more. it is good!
--Editor: Yazu Electronics - Business YUKI
Magnetic screen windows have revolutionized the way we enjoy fresh air and keep insects out of our homes. These innovative screens are designed with a magnetic closure system, allowing for easy entry and exit while effectively sealing off any gaps. Made from durable and high-quality materials, magnetic screen windows provide a reliable barrier against bugs, mosquitoes, and other unwanted pests. They are easy to install and remove, making them a convenient option for both temporary and permanent use. With their transparent mesh construction, magnetic screen windows allow for unobstructed views and optimal airflow, creating a comfortable and bug-free environment inside your home. Whether you're hosting a gathering or simply enjoying a peaceful day indoors, magnetic screen windows offer a practical and hassle-free solution.
Magnetic screen window, Insect screen, Mesh screen
Jinwu Glass Fiber Co., Ltd , https://www.jwglassfiber.com