Toilets are used by everyone in the house, and it looks the same. The clean, clean toilets will only be known after use. So for owners who do not know what to do, how should the toilet be chosen? When installing a toilet, what matters should you pay attention to?
First of all, the light of the toilet is not bright: the toilet with high glossiness has higher density, and the easier it is to clean and not dirty.
Look at the ceramic texture: The quality of the porcelain is directly related to the life of the toilet. The higher the firing temperature is, the more uniform the porcelain is.
The third look at the flushing function: flushing the toilet directly depends on the design of the pipeline, but also with the height of the water level and water tanks are also related. The current enrichment methods are straight flush, siphon and so on. The straight-through type has a large pipe diameter, and the flushing force is hard to be blocked. The siphon type uses a vacuum to drain the water and change the water. The sound is small.
Fourth, look at the water: The quality of the water determines whether the toilet is used normally, and more than 90% of the problems appear on the water. The water must be inspected carefully at the time of purchase. It is best to install it before leaving the factory to see if the structure is compact, whether the active connection is sensitive and reliable, and whether the sealing part is flat. The water material is preferably a polymer material.
Fifth, water-saving: In line with the concept of water-saving and environmental protection, 3/6-liter two-gear effect is good. (Big and urine flush separately)
Finally, see the installation and service: whether with seals, valve, etc., whether the package installation, whether to provide after-sales service, brand water warranty for three years, the normal use of ceramic products within five years without quality problems.
Toilet installation precautions:
1. The distance from the center point of the ground pit to the wall surface should be within 30cm-40cm, allowing deviation of 2cm. Avoid gaps between the toilet and the wall that cannot be installed or installed.
2. The diameter of the old cast iron pipe is 100, and the diameter of the pvc pipe is 110. The ground and the outlet of the sewage pipe are in parallel, avoiding that the seal cannot be installed due to the protrusion of the pipe mouth or the pipe nozzle is not sagged, resulting in leakage and anti-odor.
3, floor surface should be dry without uneven, high and low, to avoid the toilet seat after installation or horizontal level is not enough to cause the seat overflow.
4, the installation position of the triangle valve should be below the center line of the water pipe, more than 20cm to both sides to avoid maintenance problems.
Toilet toilet toilet seat installation
Bridge Faucets,bridge kitchen faucet,Bridge Faucets price
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinsinkfaucet.com