Recently, in most areas of China, severe storms have caused many LED merchants to enter the water, causing LED display screens to enter the water; for this kind of situation is constantly frequent, now here we explain in detail for everyone to encounter such a situation The correct way to deal with:
1, with the fastest speed with a fan or other tools, the water LED display screen body completely blow dry.
2. After the panel is fully dried, it is electrified and burned. The specific steps are as follows:
a. Adjust the brightness (all white) to 10% and energize it for 8-12 hours.
b. The brightness (all white) is adjusted to 30% and the electricity is aged for 12 hours.
c. The brightness (all white) is adjusted to 60% and the power is aged for 12-24 hours.
d. The brightness (all white) is adjusted to 80% and the power is aged for 12-24 hours.
e. The brightness (all white) is adjusted to 100% and the power is aged for 8-12 hours.
After completing the above steps, the LED display screen body will basically return to normal; however, the following points need to be noted during the processing:
1. When it is found that the water in the warehouse or the screen of the LED screen is flooded, it should be handled urgently without delay.
2. Organize the personnel to blow dry the LED display screen body of the water.
3, do not put the LED display screen has been in the water into the air box, so it is easy to stuffy LED lights broke.
4, in the warehouse when the water, the air box may have to enter the water, and should be exposed to all air boxes to prevent evaporation of moisture in the box after the LED display screen.
5. All influent LED display screens may not affect the stability of the screen more or less in time. In the process of emergency treatment, the phenomenon of constant light may occur after the screen body is electrified. Please pay attention to the owner. Observed.
6, all the water LED display screen body in the air box. For more than 72 hours, the screen is basically worthless. Please handle it carefully. Text / Shenzhen LED base (WeChat public number: Shenzhen LED base)
1, with the fastest speed with a fan or other tools, the water LED display screen body completely blow dry.
2. After the panel is fully dried, it is electrified and burned. The specific steps are as follows:
a. Adjust the brightness (all white) to 10% and energize it for 8-12 hours.
b. The brightness (all white) is adjusted to 30% and the electricity is aged for 12 hours.
c. The brightness (all white) is adjusted to 60% and the power is aged for 12-24 hours.
d. The brightness (all white) is adjusted to 80% and the power is aged for 12-24 hours.
e. The brightness (all white) is adjusted to 100% and the power is aged for 8-12 hours.
After completing the above steps, the LED display screen body will basically return to normal; however, the following points need to be noted during the processing:
1. When it is found that the water in the warehouse or the screen of the LED screen is flooded, it should be handled urgently without delay.
2. Organize the personnel to blow dry the LED display screen body of the water.
3, do not put the LED display screen has been in the water into the air box, so it is easy to stuffy LED lights broke.
4, in the warehouse when the water, the air box may have to enter the water, and should be exposed to all air boxes to prevent evaporation of moisture in the box after the LED display screen.
5. All influent LED display screens may not affect the stability of the screen more or less in time. In the process of emergency treatment, the phenomenon of constant light may occur after the screen body is electrified. Please pay attention to the owner. Observed.
6, all the water LED display screen body in the air box. For more than 72 hours, the screen is basically worthless. Please handle it carefully. Text / Shenzhen LED base (WeChat public number: Shenzhen LED base)
soap rack,soap holder,soap stand,stainless steel soap holder,steel wire soap stand,etc.Let your bathroom become more simple and upscale!Applicable to families, hotels, home stay and other places to use.
304 stainless steel never rust, will easy to clear, it's also very durable!
we are 15 year factory, we had big engineer team, and strong production line, can give you good serve and quanlity. Welcome to cooperation!
soap rack,soap stand,soap holder,soap dish,soap dish rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.szbrassnuts.com