“The smaller machine parts are used for a more compact structure.†ACE Buffers has been following this requirement from developers and manufacturers. The company in Langenfeld is now available with the smallest HB-12 hydraulic brake cylinder. This small brake element with a diameter of only 12 mm is ideal for precision mechanical applications.
ACE has further expanded its hydraulic brake cylinder supply and now offers hydraulic brake cylinders with a diameter of 12 to 70 mm. All of the company's HB Series products are fully self-contained, require no maintenance, and are enclosed systems that can be adjusted in the terminal position. This series of products can produce braking on both sides or on one side, with a stroke length of 10 to 800 mm. The minimum indentation and extension speed can be adjusted very precisely with the smallest HB-12 hydraulic brake cylinder. Like other larger-sized products in the same series, this protection device also prevents the device from entering the movement in a sudden impact. In other applications, it can act as a balancing element to dampen a reciprocatingly oscillating object, or as a driving element to provide a uniform operating speed due to its propulsion speed.
Micro brake cylinders come up later
In order to make the product structure more compact and work cost-effective, the designer should carefully consider every detail in the product design. Just like a minimal improvement in the chassis of a Formula 1 car can help achieve the best anti-slip and acceleration performance. In today's precision machinery and other fields, the most modern machines can also use small brake cylinders such as 12mm. To optimize. Due to its compact construction and light weight, the HB-12 hydraulic cylinder can be more easily integrated into the structure. At ambient temperatures of -20 to 80 ° C, they reduce the pressure of 20 to 180 N or increase the same large tensile force while maintaining the same high quality of the larger HB-1 to HB-70 products. And service life. Not only that, but ACE's new micro-cylinder is a technological advancement. Rainer Loh, manager of industrial gas springs at ACE, commented: "Unlike the HB-15 to HB-70 hydraulic brake cylinders, this new brake cylinder is made by a threaded journal on the cylinder head. Adjusted. Attachments that are connected by a bolt are no longer likely to be undesirably adjusted under load. In addition, the cushioning force can be adjusted very easily with a screwdriver."
Up to 80mm travel in a variety of different applications
In addition to the above applications, a damping system such as a hydraulic brake cylinder is also very suitable for the adjustment of synchronism in both directions. The machine components produced by ACE can be used for innovative applications. They can not only fully utilize their braking functions in the factory floor, but also can be applied on the cableway and on the regatta. In these applications, some swings occur at all heights, and these swings must be suppressed. In addition to suppressing moving objects, the HB-12 hydraulic brake cylinder also suppresses and damps the fall of the mechanical flap that is not controlled, slowing it down. ACE can supply standard HB-12 hydraulic brake cylinders. The double-stroke piston rods are made of stainless steel and the stroke can be selected between 10 and 80 mm. In the state in which the piston rod is extended, the length of the hydraulic cylinder varies from 55 to 195 mm depending on the stroke. The company, known worldwide for producing cushioning equipment, can also offer customized products based on user requirements. ACE's other representative hydraulic brake cylinders are available in hard ceramic construction coated housings and piston rods. Thanks to the well-designed DIN-compliant connector standard combination system, all brake cylinders can be applied and combined almost anywhere.
The use of brake cylinders allows for particularly precise control of the indented and extended operating speeds. As a safety device, it prevents the device from entering the movement quickly and impactfully. As a balancing device, it can cushion the reciprocating object in an ideal way. As a "drive component", it provides a uniform operating speed. The hydraulic brake cylinder is a closed system that can be installed without maintenance. The hydraulic brake cylinders of the DVC series have separate adjustment elements for the pressure and tension directions. It can be adjusted separately at any position of the stroke, and can be most closely matched to various applications. It is the first generation of hydraulic brake cylinders whose retraction and extension speeds can be adjusted separately from the outside. The HB series is a device that can be adjusted at the end position. This type of product can be used as a two-sided or one-sided brake device. Available in a variety of housing diameters, stroke lengths up to 800mm
Wireless Battery Powered,Wireless Battery Powered Par Light,Wireless Control Led Mini Par,Wireless Led Par Light
EV LIGHT Guangzhou Co., Ltd , https://www.evlightpro.com