In the production and acceptance of doors and window covers, the following points should be noted:
(1) Whether the original door openings, window holes, and sill boards are horizontal, vertical, and whether the size of the door openings are appropriate, and if there are any deviations, they should be corrected.
(2) Whether the original door frames and window frames are square, with or without deformation and looseness, if any, should be amended.
(3) The selected plate should meet the technical requirements, no shelling, no insect spots, smooth surface, fresh texture (doing this without mixing water paint).
(4) The seams should be tight, no hammer marks, no nail holes, and they should be applied as close as possible.
(5) The lines are flawless, crack-free, smooth, and straight, meeting the design requirements.
(6) Apply the squeegee to brush evenly at the instant, the thickness is about 0.2 mm, and the surface can be covered when it is not sticky.
(7) The base layer may adopt a frame structure or a plate structure.
(8) The spacing between the fixing jaws should be 15
Door and window acceptance window paint
The Best Turkish Coffee Maker,Travel Turkish Coffee Maker,Traditional Turkish Coffee Maker,Portable Turkish Coffee Maker
Ningbo DeNeu Imp. & Exp. Co., Ltd , https://www.deneucn.com