Solenoid valve life test how to measure?

The following 4 cases hinder the normal operation and shorten the life of the solenoid valve:

1. The medium changes during use

2, take over the rust

3, air compressor oil oxidation, carbon particles such as tar, mixed with the pipeline

4, there are dust and other impurities in the pipeline

The current market can supply a device for the life test of a solenoid valve to solve the above problems.

Technical performance and indicators:

(1) The water valve is opened at a constant pressure of 12 bar (settable), and the hot water reaches a maximum of 90°C. According to different models of water valve on-off requirements (such as 5s through 5s broken once) to test, the number of consecutive tests in about 50,000 times (can be set).

(2) The test bench can automatically record the on/off status of the water valve coil. If the water valve fails in the middle, the stop time can be recorded, but it does not affect the work of other water valves.

(3) The test stand can satisfy the simultaneous detection of 10 water valves.

(4) Pressure control accuracy ± 0.2 bar, water temperature control accuracy of ± 1 °C.

(5) Adjustable solenoid valve voltage (12~300V)

(6) Can be used as a low voltage on-off performance test