Tiles are very particular about the purchase, you must know that once the ceramic tile is covered, if there are problems, then the consequences are very serious! The following list of issues must be clear before the renovation, these issues often determine After the selection of tile types, specifications, price and even the overall style of the home.
1, in the end shop what?
This problem seems to be very idiotic, but it is the most basic, first of all you have to fully understand which space is suitable for which tiles! In fact, the key to this problem is not what to use, but how to match various materials. For example: Some owners want to tile in the living room while choosing wood flooring in the bedroom. This creates problems:
If the living room is paved with ordinary vitrified tiles and the bedroom is paved with laminate flooring, there will be a height difference of about 3cm between the bedroom and the living room. This is mainly due to the fact that there is no keel under the laminate flooring. So is it right in the bedroom to choose solid wood flooring? Of course not. Usually, solid wood floors are installed by manufacturers and 3 x 2cm keels are used. If the size of the 5 x 4cm keel is best used for leveling with the tiles in the living room, the service terms for replacement keel of various floor manufacturers are different. Therefore, we must fully communicate with the owners. After all, our purpose is to make the owners satisfied, understand the basic requirements of the owners, and then find the most appropriate program based on the owners' original ideas. If the owner wishes to choose the way to mix floor and floor tiles, he must plan well to avoid unnecessary troubles. Here are two basic ways to match: tile + laminate flooring = room floor with a cement mortar pad height 3cm, tile + solid wood flooring = 5x4cm keel under the floor specifications
2. What type of floor tile is selected?
Is it 600? 800? Or 1000 or other specifications? This is a problem! The current floor tiles, especially the use of the living room floor tiles are mainly 500mm, 600mm, 800mm and 1000mm (ie 1 meter) specifications, including The most used are two kinds of 600mm and 800mm. So how do you choose? It is recommended to choose according to the area of ​​the shop and the placement of the furniture. Since 600mm bricks per unit area have more bricks than 800mm bricks, the space can be expanded visually. At the same time, the waste rate when laying corners is lower than 800mm bricks, while the space is large 800. Even 1 meter bricks look atmospheric. Therefore, it is recommended that the space of less than 40 square meters choose 600mm specifications of the floor tiles; and more than 40 square meters of space can choose 800mm or one meter of floor tiles. It is worth noting that if you have too much furniture (such as a bedroom) in your room and you cover a large piece of floor, it is best to use a 600mm floor tile.
3. What brick is the shop?
In the end, what kind of brick is the choice of shop? Is it an antique brick or a polished tile? The antique brick is natural and soft. In the retro style, especially in the mosaic, there is an advantage that the vitrified tile cannot match. At the same time, due to the protection of the surface glaze layer, the ability to resist dirt on tea, ink and even cigarette butts is also superior to vitrified tiles. However, vitrified tiles are not without merit. With the development of technology, the vitrification and smoothness of vitrified tiles on the surface of vitrified tiles are already quite high. Not only can they make the living room look brighter, but they will never be glazed like glazed tiles due to collision and friction caused by external forces. . So what kind of brick should be selected according to the style you want to reflect, to be bright, the atmosphere to choose polished tiles, to be natural, warm to pick rustic tiles. It is suggested that the living room and living room should be made of relatively limited choice of vitrified tiles, while the well-lit living room and non-slip kitchen and bathroom floors, balconies, etc. can be used for antique or other glazed tiles.
4. What does "microcrystalline jade", "microcrystalline stone" and "microcrystalline diamond" mean?
A lot of people visiting the building materials city may be the most troublesome record tile name. What "microcrystalline jade", "microcrystalline stone", "microcrystalline diamond", "super cool stone", "polycrystalline jade" and so on. In fact, there is no need for us to remember the names of these mouthwashes. They all describe the same kind of thing—the vitrified tiles. These names are just the codes used by manufacturers to differentiate the products and further refine the market. When choosing, just stick to your budget and try your best to choose the product that suits you. Microcrystalline stone surface is very dazzling, but its hardness is only about 5 degrees Moh, not wear, not suitable for use on the ground, more suitable for dry hanging on the outside wall.
Del Floor Flooring Natural Flooring Room Furniture Cement Home Decor Living Room Decor Style Floor Tile Antique Floor Retro Furniture Antique Tiles Bathroom Tiles Bathroom Tiles Bathroom Tiles Whole Bathroom Exterior Tiles Tiles Specifications Kitchen Tiles Microcrystalline Tiles Balcony Tiles Tiles Bedroom Tiles Flooring Decoration Home
Self Adhesive Bitumen Membrane
Self Adhesive Bitumen Membrane,Self Adhesive Bituminous Membrane,Self Adhesive Bitumen Roll,Self Adhesive Bitumen Flashing Tape
Suzhou Smart Building New Materials Co., Ltd. , https://www.srdwaterproofing.com