The motor market is targeted at three types of customers: end users, agents and manufacturers. According to statistics, the proportion is 5% for end users, 15% for agents, and 80% for producers. Dalan Motor Xiaobian tells you whether high-efficiency motors can be accepted by the market. The key lies in the attitude of the producers. Why do manufacturers not consider high-efficiency motors when designing? The key is difficult. For details, please refer to the following details: 1. Industrial field 1 From the large amount of data, we can see the significance of energy efficiency improvement of industrial fields for energy conservation and environmental protection. For every one percentage point increase in energy efficiency of industrial motors, electricity consumption can be saved by 26 billion kWh per year. 2 By promoting high-efficiency motors and energy-saving retrofitting of motor systems, the efficiency of the motor system can be increased by 5 to 8 percentage points as a whole. 3 For manufacturers, to improve the energy efficiency of the motor, financial support and market role is an important guarantee for its funds. However, according to the current situation, due to the implementation of the mandatory standards and financial support policies put forward by the state on the issue of high-efficiency motors, downstream buyers have affected the purchase due to the high cost of high-efficiency motors. 4 Therefore, the answer given by the manufacturer is very simple. Since the financial support policy has not been implemented and the user has not put forward an efficient request, it is still necessary to use the low-efficiency motor. 2, home appliances field 1 At present, the efficiency of China's motor products is generally not high, which seriously affects the energy-saving effect of home appliances. Analysis and research indicate that compared with ordinary motors, the energy consumption of high-efficiency motors can be reduced by about 20% on average, while the energy consumption of ultra-efficient motors can be reduced by more than 30%. 2 Home appliance manufacturers naturally do not choose high-efficiency motors in the initial design process due to market competition. Because the high cost of high-efficiency motors also determines its high price, in the current Chinese market, where the competition is particularly fierce, high prices mean more pressure in the process of sales. 3 Energy-saving home appliances puts higher demands on the intelligence level of home appliances. In order to achieve energy conservation and environmental protection, home appliances must be more sophisticatedly controlled by intelligent means to achieve efficient use of energy. Not only do you need higher-priced motor products, but you also need to purchase additional motor control chips and solutions. At the same time, you have to face more intense market competition, which will inevitably affect the choice of high-efficiency motors for home appliance manufacturers. 3, the automotive field 1 new energy vehicles have been fully used high-efficiency motor is no doubt, including the various parts and the hub motor used in its drive are all high-efficiency motors 2 new energy vehicles have been included in the energy-saving products Huimin project as early as 2013 ", promoted nationwide, and given a one-time subsidy of 3,000 yuan per vehicle. At that time, it was planned that by 2020, the cumulative production and sales volume of new energy vehicles would exceed 5 million units, and this phenomenon will drive the rapid growth of the drive motor market. 3 After entering 2015, the domestic new energy auto industry realized that it is no longer realistic to rely on state subsidies to attract consumers to buy new energy vehicles. 4 Therefore, the promotion of high-efficiency motors in the automotive field cannot be separated from the popularization of domestic new-energy vehicles. Domestically-produced vehicles must first increase their competitiveness in the blue ocean of new energy vehicles. ----- Responsible Editor: Dalan Oil Pump Motor 02- Purchasing Consultant Copyright http:/(Dalan Motor) Reprint, please indicate the source http://news.chinawj.com.cn
1000*1000mm Marble Porcelain Tiles
Marble look porcelain tile features with modern patterns, and is dirt-proof and waterproof,making it favored by the interior designers.The marble look tile sizes are available with 100x100cm,50x100cm with polishing and matte finishing, which can be widely used in any place like home,hotel,airport,office buliding and other commercial places.
- Compared with natural stone or marble,marble porcelain tile is stain-reisitant and easy to clean.
- High density and good hardness because of 7200tons pressing machine to produce it.
- Wear resistance and anti-slip.
Ceramic Tiles Flooring,Ceramic Tile And Stone,The Ceramic Tile Warehouse,Ceramic Tile Wall
Foshan Castel IMP&EXP Co.,Ltd , https://www.foshancastel.com