What is the correct working operation and maintenance method of the ball press machine? The service life of the ball press machine is related to the quality of the ball press manufacturer and the ball press machine. These are known to all, but more affect the ball press equipment. The service life is the correct working method. The reasonable use of the ball press equipment will make our ball press work better. Here is a brief introduction to the correct operation and maintenance methods of the ball press equipment. 1. During the succession of the ball press equipment operator, it is necessary to check the overall sanitation of the ball press. If the double-roll ball socket of the ball press is not clean, it will lead to uneven feeding and will affect the output of the ball press. At the same time, it will also cause damage to the pressure roller. Second, the ball press should be inspected before starting the machine. The ball press must be fully prepared and rigorously inspected before the normal start. The parts of the equipment itself must be intact. All the fixing bolts and the grounding nuts should be firm. Tighten, the machine accessories must not have anything and things that hinder the operation. After the inspection is completed, the production can be started. After the speed of the ball press is normal, the machine can feed the machine. The feeding must be uniform. Stop the feeding of the machine before stopping. Wait until there is no material left in the hopper to stop the machine. . Third, after the ball machine equipment is in normal operation, it should be noted that the conveyor conveys materials evenly, not too much, too much. Is the shooting rate normal? If the ball formation rate is too low or other conditions, you need to check the parking. Also, pay attention to whether there is abnormal sound during the production process of the ball press. If the sound is too loud, you need to stop and check. In addition, it is necessary to check whether all the fixing bolts are broken or loose during the operation of the equipment. Check that the lubrication of each bearing is normal and there is no overheating. Check that the seals are tight and there is no oil leakage. Check that the operation of the pressure roller and gear is normal. Fourth, the pressure ball machine equipment should pay attention to the regular maintenance and maintenance inspection, at regular intervals, it is necessary to check whether the lubricating oil of each part of the ball press equipment is to be added, whether there are any loose parts and other faults, do a good pressure ball machine Maintenance of the equipment. The above points are what the correct operation and maintenance method of the ball press equipment. For more information about the product of the ball press equipment, please contact us. If you need to press the ball machine, you can call 13521502217. Http://news.chinawj.com.cn
Direct-connected Integrated Water Supply Pump Set
Direct-Connected Integrated Water Supply Pump Set,Water Supply Equipment,Integrated Water Supply Equipment,Tap Water Supply Equipment
Shanghai NuoSai Pump Manufacturing Co., Ltd. , https://www.nuosai.net