The toilet that started out at first was a squat toilet, so our team was not unfamiliar with a squat toilet. Many people will use a squat toilet with a toilet potty toilet, today small'll tell you about squatting toilet installation method.
Squat toilet installation method
1, when installing a squat toilet, according to the location of the sewage outlet we want to install matching, you can choose to leave some specific locations on the wall, so that a good drainage pipeline, but also to determine the sewer inlet and ground The distance between planes.
2. There is also a requirement when installing a toilet bowl. It is required to set a depth that can be installed under the installed floor. Remember that the depth must be greater than the height of the toilet bowl to facilitate installation.
3, in the installation, first connect the rubber plug into the water inlet hole of the squatting pan. Put a layer of glass glue or putty on the outer edge that contacts the inlet hole of the squatting pan and insert the inlet pipe into the water inlet hole of the rubber plug to make it seal well with the rubber plug to prevent water leakage.
4. Note that when installing, it is necessary to first apply a layer of glass glue or putty to the edge of the water outlet of the squatting pan, and put it into the inlet of the sewer pipe, and use the coke dregs or other fillers to erect the squat toilet. Level.
5. After installation, open the water inlet system and test to see if there is any water leakage at the joints. If water leakage occurs, it is necessary to carefully inspect the joints until the problem is solved.
6. After installation, it is necessary to check whether there is any leakage or not. If there is no water leakage, fill the squatting pan with the filler. At the same time, fill the 1cm above asphalt or linoleum on the contact surface between ceramic and cement mortar. material. The squatting pan is fixed in the horizontal plane with cement mortar, and it can be placed on the cement surface with a smooth and firm floor. Try flushing again and use without exception.
The above is how to install the squat toilet that Xiaobian introduced to everyone, and how to install the squat toilet . When you look at the installation of the workers, you can pay more attention to them, and you can also be more clear about yourself. I hope you can help everyone. If you want to learn more about other related information, please continue to pay attention to this site. More exciting, please stay tuned!
Squatting toilets Squatting toilets squatting toilets
stainless steel commercial flat washers are used under bolt heads or nuts to increase the bearing surface area, or to offer protection so that the nut or bolt can be rotated without distortion of the bearing surface. Flat washers are also used to give tightness to a joint, to prevent leakage, and especially to distribute pressure under the head of a bolt or nut. Dimensional specifications are governed by ASME B18.21.1. Commercial flat washers generally have a larger outer diameter than SAE (Society of Automotive Engineers) flat washers, and can be utilized in nearly any application. stainless steel fasteners are commonly used in applications that require general atmospheric corrosion resist ance, such as chemical and food processing equipment. Stainless steel has a higher corrosion resistance than carbon steel.
Stainless Steel Washer,Ss Washer,Stainless Steel Square Washers,Black Metal Washers
Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com