Home decoration wooden door acceptance knowledge

For the sake of beauty and convenience in home decoration, wooden doors are often chosen. The surface paint of wooden doors and windows shall be smooth and bright, free of quality defects such as falling, bubbles, wrinkles, etc., and there shall be no corrosion points, dead ends, and broken residues; the wood and the color of door and window covers shall be coordinated with the color of doors and windows, and the panel shall be The color difference of wood lines cannot be large, and the tree species should be the same.

First, appearance should be beautiful:

The surface paint of wooden doors and windows shall be smooth and bright, free of quality defects such as falling, bubbles, wrinkles, etc., and there shall be no corrosion points, dead ends, and broken residues; the wood and the color of door and window covers shall be coordinated with the color of doors and windows, and the panel shall be The color difference of wood lines cannot be large, and the tree species should be the same.

Second, the door and window fan Founder, can not warp and deform, the door and window fan just can be stuffed into the door and window frame, and in line with the door and window frame:

If the gap between the sash and the frame is large, it is mainly due to the inaccessibility of the installation or the fact that the frame of the door and window is not perpendicular to the ground. The sash can be removed and re-planned; if the frame of the door or window is not vertical, the gasket should be found within the frame. straight.

Third, the hinge should be accurate and securely installed:

If the hinge is not on the right side, it will cause the door and window fan to not match the frame, and the door and window switch will not be smooth. Each hinge can be unscrewed by one screw, and then the fit of the door and window fan and the frame can be adjusted. After the adjustment is correct, all screws are tightened. If the hinge screws are short, or if they are screwed in, the screws are not screwed or the screws are skewed, it will cause the door sash to wander. The appropriate screws should be replaced. The screws must be straight. The screws should be pinned in 1/3 and the rest of the screws must be screwed in.

4. The opening and locking of the door lock shall be smooth, and the two parts locked on the door leaf and the door frame shall be matched:

Inappropriate locks can cause the door switch to be uncomfortable. The tongue plate should be removed, the tongue and groove should be repaired with a chisel, and the position of the tongue and bolt mouth should be adjusted before installation. In addition, the opening direction of the door must meet the requirements.

Fifth, there must be grass-roots materials in the door and window cover:

When the window cover is made of block board or density board, the base board should be fixed on the keel of the window frame base and then nailed; the door cover should be made of wood and then framed, planed and straightened, and then assembled and installed on the wall. On the body, cover the base plate and veneer again. Tap the side panel of the door and window cover by hand. If a sound of empty drums is heard, it means that there is no padding such as a blockboard, etc., which should be dismantled.

Doors, doors, wooden doors, brand doors, doors, switches, paint, home decoration, home

Dispensing Peristaltic Pump

Dispensing Peristaltic Pump is an Ideal vials filling pump.

Storage function-user data storage function:(9 sets of filling data) . The original filling data can be quickly found by entering the storage interface with one key.
·External control function-Multiple mode selection: communication mode, analog mode,foot switch control.Provide customized services.
·Memory function-data will be stored in time after power off. When power supply is restored, the pump can remember the parameter Settings before power off, which is more safe and reliable.
·Calibration function-intelligent flow calibration: after setting the target flow, input the actual flow value,and the system will automatically carry out flow calibration to ensure the flow accuracy
·Full speed function-one button to control full speed operation, used for quick cleaning, filling and emptying tubes, etc
·Suckback function-By setting Suckback angle and Suckback speed to prevent liquid dripping and ensure fluid accuracy.
·lock screen function-lock screen design, error proof touch, application more secure.
·Display function-real-time animation of the operation interface shows the running state and working parameter.
·Touch-screen function-3.5-inch color LCD screen, (English and Chinese optional) , touch-screen operation,intuitive and
intelligent.

CE certified product based on request.

Dispensing Peristaltic Pump,Chemical Liquid Pump System,Small Bottle Filling Machine,Tomato Sauce Dispensing Pump

Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com

This entry was posted in on