Increase productivity with OEE management tools
For a variety of reasons, the production cycle of the entire line is optimized, and the capacity usually cannot reach the theoretical value immediately. OEE is an independent measurement tool used to measure the ratio of actual capacity to theoretical capacity, availability, performance index and quality index are the three key elements of OEE.
OEE=Availability × Performance Index × Quality Index
For example: OP100 equipment working time is 24h, planned to stop 20min before the shift, the actual fault is stopped for 180min, the production cycle is 14.1min, 83 pieces are produced on duty, no waste, and its OEE is 82%.
Availability = operating time / planned working time to assess the damage caused by the shutdown.
Availability = (24 × 60-180) ÷ (24 × 60-20) = 89%
Performance Index = Production Beat / (Total Operating Time / Total Production) used to evaluate the loss in production speed.
Performance index = 14.1 × 83 ÷ (24 × 60-180) = 93%
Quality Index = Qualified Product / Total Production, used to assess the loss of quality.
Quality index = 100%
Through analysis of the production line, analysis and formulation of rectification and preventive measures from production organization, logistics and distribution, quality assurance, equipment maintenance, and tool management. After one month of improvement, the production capacity of the production line was successfully realized at 80 units/day. Above, the OEE value of the device is also stable above 80%.
Conclusion
Cost reduction and efficiency increase are the goals that enterprises strive to achieve. Improving production efficiency is not only to improve tool parameters, but also to adjust process parameters and process plans in time according to changes in processing conditions, so that the process plan is more reasonable.
Long-term use of OEE tools in actual production, companies can easily find bottlenecks affecting production efficiency, and improve and track to improve production efficiency.
Previous page
Liang metalworking Tools Co., Ltd. has more than 200 employees, who have undergone professional technical training and rich production technology experience. The company has self-supporting import and export rights, and more than 90% of its products are exported to Italy, More than 60 countries and regions, including Spain, the Netherlands, Poland, Russia, Nigeria, India, Iran, South Africa, Japan, Brazil, ELDOR, etc
5M Tape Measure,Metal Measuring Stick,Tape Rule Measurement,Long Steel Measuring Tape
Henan Liangjin Tools Co.,Ltd , https://www.liangjintools.com