There are more than 800 kinds of molds of various specifications in Zhejiang Jiaxing Tongcheng Plastic Mould. In fact, the roadside stone mold is widely used in municipal traffic engineering.
Roadside stone plastic mold cement prefabricated parts production process:
The roadside stone prefabricated parts are plastic molds designed according to the engineering drawings. Use the mixed cement concrete to pour into the plastic mold and shake it through the vibration table for a few seconds. After the cement is hardened, it can be demoulded and recycled. Compared with the iron plate steel mold, the biggest advantages of the plastic mold: 1. The worker is convenient to operate, saves time and effort, and does not need to disassemble the steel mold. The cement prefabricated products have smooth surface and high strength, and there is no rough pores on the surface of the product. Third, the product size made by the plastic mold is stable, and the error between the products is less than 1 mm, which is more easily accepted by the quality inspection department of the construction unit. Cement brick plastic molds are respected, recognized and actively promoted by users all over the country, while plastic molds produce color bricks, roadside stones, manhole covers, and low cost, high return, simple equipment, fast production and reliable products. Quality is unmatched by any other device! It is an epoch-making leap in concrete products!
Jiaxing Tongcheng Road along the stone plastic mold
Need to pay attention to the purchase of roadside stone plastic mold:
The raw materials used in all plastic molds are first-class new materials, and no crushing and returning materials are used. Therefore, do not use the roadside stone plastic molds of the factory and the molds made by crushing and returning materials on the market to compare the prices. The mold has a short service life, easy aging, deformation. The surface is not flat, and the cement parts are not easy to demould. Please be careful when purchasing.
1. Don't compare the weight and cut the plastic mold to compare the wall thickness of the product. Through the recycling of the crushed material, after the crushing, there is always a cement slurry. Under the same steel mold injection molding, the product made is only heavy and will not be light.
2. Don't compare prices too much. Buying two 40 yuan molds is not as durable as a 50 yuan mold. The size of the cement pieces is stable, but it does not expand. There is no risk of product failure.
Third, the smashing and returning material is made of stone plastic mold, the surface has many black spots, the turbidity is not bright, and the afterburning is large.
Fourth, the appearance of the mold product should not have a lot of flash burrs, there are traces of knife and pin. Affecting the appearance of the product is the reason for the injection molding of the steel mold. The steel mold is not opened well, and the quality of the roadside plastic mold is not good.
5. The customer purchases plastic molds for cement prefabricated parts. It is best to purchase plastic mold intensive areas. Most of them are concentrated in Jiaxing, Zhejiang, Baoding, Hebei, and other agents are more.
Concerned about surprises
Tagged with: plastic mold, roadside stone, prefabricated parts, cement slurry, vibration table
Previous: "Bubble" and "Black Hemp" in the production of aluminum strips Next: Three major product features of plastic molds for Tongjing manhole cover
NINGBO DOTEC is a pneumatic air pilot valve manufacturer and supplier in China for many years.
Options:
1. Port Size: M5x0.8, 1/8'', 1/4'', 3/8'', 1/2''
2. Position and Way No: 5/3 Way, 5/2 Way, 4/2 Way, 3/2 Way, 2/2 Way
Air Pilot Valve, Pneumatic Pliot Valve, Pneumatic Air Pilot Valve
NINGBO DOTEC AUTOMATION CO., LTD , https://www.ningbodotec.com