The cross-to-high turnstile incorporates mechanical, electronic, microprocessor control and various read-write technologies organically. By configuring various reading and writing devices, adopting reliable performance safety protection devices, real-time alarm systems and direction indication interfaces, they can coordinate and realize the intelligent control and management of the channels, and be applicable to the one-way or two-way control of the import and export channels of human traffic.
Cross full- function switch features:
1) With fault self-checking function, it is convenient for user's maintenance and use.
2) With a variety of work modes to choose from, you can limit the flow of reading in both directions, and you can also read the card while you are in the other direction. You can read the card while you are in the other direction.
3) With bi-directional free-flight power off, the power is automatically restored to the lock function, so as to quickly organize the evacuation of people in case of emergency.
4) After reading the valid card, after the pedestrian enters, you only need to gently push the door, automatic reset, two-way access, the three doors are always closed, the rotating door rotates 120 degrees each time (or the rotating door rotates 90 times each time) degree)
5) Using a unique drive system, the gate locks in the zero position and unlocks more accurately and reliably.
6) It has a unified and standard external electrical interface, which can be connected with various read-write devices, facilitating system integration and remote control and management through the management computer.
7) With automatic reset function. After the valid card is read, if the passer does not pass within the specified time, the system will automatically cancel the current pass of the passer, and the limited time can be set by the administrator.
8) The entire system runs smoothly and with little noise;
The main technical parameters of the cross full height switch 1) Power supply voltage: AC220±10%V, 50HZ
2) Drive motor: DC motor 24V/100W
3) Working environment temperature: -15OC-60OC
4) Relative humidity: Relative humidity ≤90%, non-condensing 5) Input interface: 12V level signal or 12V pulse signal with pulse width >100ms Drive current >10mA
6) Communication interface: RS485 electrical standard,
7) Communication distance: ≤ 1200m 8) Speed: 30 people/min (normally open mode), 20 persons/min (normally closed mode)
9) Gate opening and closing time: 2 seconds
High Speed self-Recovery Rapid doors are the technological evolution of old, PVC high speed doors or heavy folding doors, now obsolete and not suited to today's industrial needs.
High-quality panels, the resistive safety edge fitted to the bottom edge of the door, photocells and barriers make this product both safe and durable, being totally self-repairing, thanks to its special [Anti Crash System".
This door designed with a perimeter structure in galvanized or stainless steel, which is ideal for sliding panels. The door panel rides effortlessly within a track, thanks to the special profile and hinge designed by us, requiring low maintenance. The panel is rolled up on a roller placed within the upper crossbeam.
The door can be equipped with a counterweight or ups batteries, to fully open the door in case of power failure, and can also be equipped with large transparent sections to create a brighter and safer working environment.
Self-Repairing Door Curtain made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
Self-Recovery Rapid Door,Self Recovery PVC Rapid Door,Self Recovery Rapid Rolling Door,Self Healing Roll Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.spiralfastdoor.com