Radiation air-conditioning use of source-type humidity conditioning new air-conditioning heat pump is developed for radiant air conditioning systems, combined with heat recovery technology and ground source heat pump technology development, which is mainly responsible for fresh air load and indoor wet load, which features are as follows: â— supply air temperature and humidity Tune Air dehumidified by condensation heat after cooling, air temperature appropriate â— need to do underground heat exchanger cooling support, desiccant COP up to 5.0 or more. â— automatic operation throughout the year, without human intervention, with dehumidification, back to temperature, humidification, ventilation and other functions. â— T-shaped valve advanced energy-saving control: inside and outside the wind cycle and a week programmable features, more energy! Working mode 1, summer dehumidification, using dehumidification mode Compressor compressor out of the high temperature and high pressure refrigerant gas into the reheater, the heat is passed to the air, condensing into high temperature liquid at room temperature, and then through the water-cooled condenser, the heat passed to the cooling Water, into a liquid at normal temperature and pressure, throttling the expansion valve into the evaporator, absorbing heat through the evaporator air into low temperature and low pressure gas, is sucked into the compressor to compress, so reciprocating cycle. After the humid air is sucked in, the evaporator is cooled to below the dew point temperature, the condensate is precipitated, the absolute moisture content drops, and then enters the reheater to absorb the heat of the refrigerant to heat up. The relative humidity is lowered and sent to the room by the blower. 2, the winter to send fresh air, start the winter compressor, the outdoor fresh air and indoor air return heat is then heated into the room; optional humidifier, adjust the humidity inside the room. 3, Spring and Autumn season, the use of ventilation mode.
Other Thread Inserts,Thread Insert With Slot,Thread Other Fasteners Inserts,Self Cutting Insert
Shenyang Liming Mechanical Component Factory , https://www.helisert.com