In the era of wood flooring, if the solid wood flooring in the home is always like the floor to keep the light as new and comfortable. However, the floor has its own conservation methods. The different levels of pollution also determine the maintenance practices are not the same.
Brand shop: Square decorated solid wood flooring   Kanghui solid wood flooring
The first step: cleaning
Can be cleaned with a vacuum cleaner first, when daily cleaning. Then use a soft cloth dipped in a special detergent or soap tablet to clean it. For a large area of ​​cleaning, use a sprayer or a rotary cleaner. For natural lacquer solid wood flooring, water does not have any benefit to it. When cleaning, it is necessary to minimize excess moisture. When scrubbing, be sure to wring out the rag. The oil wax wood floor to remove the black rubber wear marks and other marks that can not be removed with water can be wiped with a soft cloth, low concentration of alcohol or a little white wine.
Step Two: Maintenance
A layer of diluted floor polish should be applied. If the use of the floor is relatively frequent, the natural lacquer floor after the floor is cleaned. The concentration of the polishing agent can be appropriately increased. Under normal circumstances, the living room can be maintained once a month, while the kitchen, living room, etc., which are frequently accessed, need to be maintained every week.
The third step: anti-fouling
Natural varnished solid wood flooring or oil waxed solid wood flooring will have dirt that is difficult to remove with ordinary cleaning methods, after a long period of use. Different situations have different solutions.
It can be mixed with degreaser and warm water at 25°C. The natural wood floor boards are difficult to clean due to a lot of fouling. Before using degreaser, the floor should be fully cleaned. For floors that are heavily fouled, the exterior of the solid wood floor should be polished off and then repainted, but this method should be a last resort because sanding will surely make the floor thinner.
Flooring paint black floor
Flying saucer ball is mainly used for polishing all kinds of hardware, especially well for the workpiece in anomalous form. The material of flying saucer ball mostly is caebon steel,201 stainless steel,304 stainless steel,the size is ï¿ 3.5×5.5 ï¿ 4×6 ï¿ 5×7 ï¿ 7×10, you can book in non-standard.
Flying Saucer Balls,Flying Saucer Ball,Best Flying Saucer Balls,Flying Saucer Balls For Sale
CHANGZHOU HUARI STEEL BALL CO., LTD. , https://www.stwballs.com